Description: 【USA Stock & Fast Shipping】 〖US〗12N.m 1700oz Nema34 12Nm Servo Motor Closed Loop CNC Driver+70V Power Supply For CNC Router Milling Engraving Machine Good News: We have USA Warehouse in USA,so we will ship this product from USA to you Package included:1 x 86HSE156 Nema34 12N.m Servo Motor Closed loop 156mm 6A1 x 2HSS86 Servo Driver 1 x 3m extension wire1 x 400W 70V DC Switching power supplyEnglish user manual will send by email Descriptions: Nema34 Closed loop servo motor 12N.m 86x86x156mmSpecificationsSize:86x86x156mmCurrent :6.0APhase:2Step Angle(degrees):1.8 degreeLead wire:4pcsHolding Torque:12N.m (1700oz-in)Resistance:0.44±10%ΩInductance:3.7±20%mHInsulation resistance:100MOhm(500V DC)Insulation Class:BOverviewThis is the nema 34 series hybrid stepper servo kit. The 2HSS86 driver adopts new generation 32 bit DSP and vector control technology, which can avoid the stepper motor losing steps and ensure the accuracy of the motor.The torque reducing is much lower than open loop stepper motor when it is at higher speed. The high speed performance and torque are enhanced in a great extent. Meanwhile the current control is based on the load, that can reduce the motor temperature rising effectively, then can extend the using life of the motor.The build-in place in position and alarm output signal can help the upper monitor to monitor and control. The function of position ultra difference alarm can ensure the machine work safely. The closed loop system is an ideal improvement and a good replacement of open loop system,besides that,it also have some function of AC servo motors.2HSS86 DriverVoltage range: AC24-70V or DC30-100VPeak current :Peak 8.0ALogic input current:7-20mAFrequency:0-200KHzSuitable motor: 86HSE156, 86HSE118, 86HSE82Encoder lines:1000Insulation resistance:>=500MΩOperating temprature:0~50℃Operating humidit:40~90%RHVirbration:5.9m/s2Max1.2.1 Stepper motor closed loop system, never lose step.1.2.2 Improve motor output torque and working speed.1.2.3 Automatic current adjustment based on load1.2.4 Suitable for all mechanical load conditions (include low rigidity belt pulley and wheel), no need to adjust gain parameter.1.2.5 Drive nema 34 series closed loop stepper motor.1.2.6 Pulses response frequency can reach 200KHZ1.2.7 16 kinds microsteps choice, highest 51200microsteps/rev.Over-current,over-voltage and position ultra difference protection function.Closed loop stepper system can be applied to all kinds small automatic equipment and instrument. Such as engraving machine, special industrial sewing machine, stripping machine, marking machine, cutting machine, graph plotter, cnc machine, automatic assembly equipment and so onWiring diagram Descriptions:Output voltage: 70V DCOutput Frequency:85%Output Current:5.7AInlet/Load stability:±0.5%DC voltage of Adjustable range:±10%AC input voltage range: 110V/220V ±15% (Switch Selection) (95-120V or 220V-240V)Overload protection:105%-135% hiccup mode,auto-recoveryOver-voltage protection:115%-150% rated output voltageWorking temperature-10℃~+50℃Output Power:400WProduct Weight: 1kgConnection instructionL: Live wireN: Negative wire+V: DC power output “+”-V: DC power output “-“+V ADJ: output voltage regulationNote:Please must be selected by switch to choose 115V/230V input before using to avoid damaging.Details determaine qualityEnough widing coils ensure pure copper,reliable performance,sufficient power,and stable work.Adopting high-quality shell,with better heat dissipation performance of the radiator,the power supply lasts for a long time and has a long service life.Size Feedback: We maintain hightest buyer ratings > Positive Feedback will be much appreciated from you. > Any dissatisfaction,please contact us immediately! > Please do not leave neutral or negative feedback before we help you out. Returns: > Defect: We will fully refund or send you a new replacement,please contact and return within 30 days. > Dissatisfaction: Please contact within 3 days, we will fully refund, after got your returned goods. > Missing parts/Q'ty: Please contact us immediately,for a new package arranged,or a partial refund issued. Contact us: > If have any question, Please contact us by ebay message before leaving neutral, negative feedback or open any dispute, we will reply within 24hours, ensure that help you solve the problem, make you satisfied.
Price: 175 USD
Location: Dallas,TX
End Time: 2024-08-18T05:56:40.000Z
Shipping Cost: 0 USD
Product Images
Item Specifics
Restocking Fee: No
Return shipping will be paid by: Buyer
All returns accepted: Returns Accepted
Item must be returned within: 30 Days
Refund will be given as: Money back or replacement (buyer's choice)
Actual Rated Input Voltage: AC24~70V or DC30V~100V.
Non-Domestic Product: No
Size: 86x86x156mm
Custom Bundle: No
Driver: 2HSS86 2-Phase Hybrid Stepper Servo Driver
MPN: Does not apply
Lead wire: 4pcs
Insulation Class: B
Modified Item: No
Holding Torque: 12N.m
Step Angle(degrees): 1.8
Brand: RATTM MOTOR
Type: Hybrid
Model: 86HSE156/2HSS86H
Frequency: 0~200KHz
Country/Region of Manufacture: China
Current: 6A