UltraArc 205 200 Amp DC TIG Stick 50 Amp Plasma Cutter Combo Unit 110v / 220v

Description: Power i-TIG 200T HomeAbout UsContact UsShop PoliciesFAQFeedback SKU: UltraArc205 Product DescriptionThe Ultra-Arc 205 combines digital reliability and control with a simple, intuitive users interface. As a replacement for the Power-Ultra line of DC TIG, Stick and Plasma multi-process welders, the new Ultra-Arc features improved and additional TIG features, more Stick features, and a stable digitally controlled plasma cutter. As far as TIG features go, it is close in comparison to the top tier DC Power i-TIG 200T. Features are similar, but with a simplified adjustment process for TIG Pulse, featuring three field tested Pulse Programs which allow the user to adjust frequency, but rely on solid, proven pre-programmed settings for Pulse amps and Pulse Time on. This allows almost anyone to operate the pulse with little additional instruction or explanation. In Stick mode, well, adjustable hot start and arc force are two popular features that improve stick performance over the older Power-Ultra series with up to 5/32" electrode capability (depending upon the class rod, some may only be 1/8" max). Of course, with new digital control of the Plasma, cutting quality has been improved over previous models.What's really a great addition though, are two TIG features that are commonly used in the Automotive and fabrication industry. The first feature is a spot timer. This allows the user to set and control the amount of time the arc stays on while performing spot weld activities. This keeps the spot weld size consistent and regular in appearance. Once the trigger or foot pedal is pressed, the arc will come on and go out after the time set has expired. This helps to keep things fool proof. The second and completely new feature is the Fast Tack feature. This is a "micro burst" of welding power that initiates the arc, and gives a very short but powerful surge of power. This is perfect for tacking and welding very thin and delicate pieces of metal. This is the first unit from Everlast to offer this feature, making it a clear choice for those hobby fabricators and small garages that have a wide range of welding activities. With the improved design and performance, the Ultra-Arc has no parallel or competition for that matter. Where else will you find a plasma that is capable of cutting up to 3/4" included with a DC TIG and Stick welder for a price like this? PRODUCT EXTRAS Features & Benefits: All-in-one portability offers new solution for small garages, farms, and portable welding activitiesCompact design allows the unit to go anywhere Straight forward controls, with 3 Pulse settings and adjustable Pulse FrequencyQuick change out of torches for easy change from TIG to plasma back to TIGImproved reliability due to completely new digital inverter designHigh duty cycle of 60% at Max Rated Amperage for TIG. 35% for Stick and Plasma at Max Rated AmperageFront air pressure gauge for easy verification of air pressureOver Current/Duty cycle protection circuit warns and interrupts welding/cutting to ensure safe, and long life operationClean and smooth plasma cuts on virtually any metalWelds Steel, Stainless Steel and Titanium (The PowerUltra is DC output only, and is not suitable for welding Aluminum, although it can cut aluminum.)Advanced TIG functions for DC TIG welding.3 Pre-Programmed Pulse functions with adjustable Pulse Frequency (.1-150Hz) in each program.Dual voltage design allows unit to be operated on 120V or 240V. (Output is reduced in 120V operation to approximately 125 amps TIG/ 95 amps Stick/25 amps plasma.) WHAT'S INCLUDED Standard Equipment: 12 ft. 26 Series Air-Cooled Everlast TIG Torch with DINSE Style connectorStick Electrode Holder and 10ft. cable with DINSE Style connector12 ft. S-45 Plasma Torch with DINSE Style connector Work Clamp with 10ft. Cable and DINSE Style connectorAir Regulator for Plasma TIG Ar/GasRegulator Consumable Starter Kit for TIG and Plasma OPTION Optional Equipment: 240V to 120V adapter for 120V use12.5 ft CK 26 Trimline torch with Superflex cablesWelding Cart RECOMMENDED USES Recommended Areas of Use: Home shopSmall GaragesPortable RepairFarm and RanchMotorsports/Off roadRecommended Metals:SteelStainlessChrome-MolyNote: Unit is not recommended weld aluminum with TIG. It supplies DC output only. TECH SPECS NOTES Product Notes: IMPORTANT PRODUCT NOTES: While under foot pedal control, the maximum amps are not limited on the panel. The foot pedal controls the full range of amps, from 5 to 200 amps. Although the pedal can control the amps through varying the pedal position, no lower maximum amps than 200 may be set. The pulse offers simple pulse control of the TIG (specification subject to change). The UltraArc 205 is an entry level DC output multi-purpose welder/cutter and cannot weld aluminum. However, it can be used to cut aluminum. For work requiring aluminum welding and cutting, see our PowerPro units. TO SWAP BETWEEN PROCESSES, CABLES AND GAS LINE SUPPLY CHANGES MUST BE MADE. THE UNIT CANNOT OPERATE MULTIPLE PROCESSES SIMULTANEOUSLY. MINIMUM/MAXIMUM Minimum/Maximum: TIG single pass capability:Steel: 36 gauge-1/2"Aluminum: Not recommendedStick electrode diameter capability:1/16"-1/8"Plasma Cutting capability* ( with dry air, new consumables, proper air pressure etc.)up to 1/2" daily use @ 15-20 ipmup to 5/8" clean cut @ 8-12 ipmup to 3/4" severance cut @ 3-5 ipm*Quality and capacity of cut depends upon consumable orifice size, standoff height, travel speed, etc. Returns For returns, contact must be made within72 hours of delivery so an RMA number is issued. If there is damage, we can help file a damage claim immediately. DOA items: In the event you receive a non working unit , we will exchange it free of charge. Items returned must be in an GOOD condition. We will inspect all returns before accepting the package. We will not accept packages that have missing parts, damages, and packages that have not been approved for return by our initial contact or packages missing an RMA number. These packages will be refused and sent back to YOU at your cost. Shipping Information: 1- We have an onsite professional shipping and packaging department and adhere to all shipping guidelines. 2- We will try to ship orders as soon as possible after payment approval unless otherwise stated in description. NOTE: Since there are many ways we offer our products, on rare occasions there is a chance an item may go out of stock that we have listed and sold on eBay. We will do our best to expedite backordered items as soon as possible. 3- Please provide a physical address. We will not ship to a PO Box. 4- Shipping charges are for the (48) Continental United States only. 5- We don’t ship to Canada 6- We charge CA tax on all orders 9.5% 7- If you pay via PayPal, shipping will be to your confirmed address only 8- Shipping to AK, HI and PR is more. please email for price. Contact Operating Hours: Monday through Friday: 9AM to 5PM PSTSaturday: 11AM to 4PM (PST)

Price: 949 USD

Location: Daly City, California

End Time: 2024-11-09T22:47:32.000Z

Shipping Cost: 40 USD