Star Trek TOS, Metal Parts, HERO Black & White, 22 Pc Metal Package, Spin Nozz

Description: For Laser Modules visit eBay Seller: https://www.ebay.com/str/dtrlpf?_trksid=p4429486.m3561.l161211Star Trek TOS, Black & White Design, Hero Full Metal Package, Season One style (aka Man Trap). Twenty-Two Part (22) Metal Upgrade Kit Features; LSR/LED Metal G. Jein Spinner Nozzle, P1 white 5/16" die cut square buttons, acrylic emitter set of 2, MidGrade fins, and much more!Fits All (resin, FG, whatever); Engineered for easy fitting onto Art Asylum & Diamond Select bodies. Includes a Mirror Polished Lock-Plate and, Machined Trigger, Black and White look aluminum top Turn Dial, and impossible to find die cut 3/16" square white buttons for the P1, and much more as listed below.Concerning the 5/16" square white buttons: Buyer may/may-not add "+/-" symbols using either; a printer and paper, (or decal transfer sheet). COMPARE NOWHERE, THIS IS AN EXCLUSIVE PACKAGE THAT ONLY WE OFFER. The nozzle is a recreation of the Greg Jein Hero Spinner Nozzle as seen on display all over the internet. See my photos and do some web surfing. This recreation was carefully copied paying special attention to the front nose radius and, knurl height. NO PHASER SHELL/PHASER PROP IS A PART OF THIS SALE, JUST THE METAL KIT PARTS.Save ON PACKAGES! This package costs about 25% less than buying all the parts separately in my eBay store. The REDUCED packing, handling, and postage COST SAVES YOU AN ADDITIONAL $70 for my P1 and P2 parts package !! Compare P1 and P2 parts packages at $300.00 on OTHER retail sites on eBay..Works Great with LED modifications and static resin bodies too. No Phaser Included in the sale.No Cast Prop-Metal parts in this listing (aka...R98 Pewter of; 98% Tin & Bismuth & Copper).Spinner 3-part nozzle, Greg Jein Style Nozzle, just like the Set-Used version.All parts are machined aluminum or are otherwise, stamped aluminum where indicated, brass parts are real solid brass.Acrylic Emitters (2) pcs. Included; one hero, one laser.Modification of the Toy Phaser or other prop/laser-prop, such as fiberglass or resin, is most likely required.The package includes one of each as listed below. Multiples are shown in photographs so you can see multiple views but you get just one of each. Phaser & Display are for reference and not included.You are the prop builder and you do the fitting !!StartrekGuy2012 TIP; The correct paint color for the handle is Krylon Maxx #9155, Satin Almond.StartrekGuy2012 TIP; Paint the P2 body any color black and then apply clear satin to kill the gloss and look more like a set-used prop.StartrekGuy2012 TIP; The crispy is excluded, use 0.014" brass from K&S metal on eBay or, Just paint over the diamond pattern black? Maybe sand it down and paint black? I use the 0.014" brass and epoxy it in place.StartrekGuy2012 TIP; The P1 thumbwheel square axle hole may require the use of a mini-file to square out the axle hole 100%, this requirement will depend on the exact version (mold series) of the shell parts you use. To review the specific dimensions and specifications for each part CLICK ON the CLICK & JUMP below. Use the back-button to return-here to this parts package page OR, better yet save a parts package in your Cart for checkout later on. The package includes ONE EACH OF THE items in the main listing photo and, MOST specifically as listed below: VIEW ALL 22 KIT-INCLUDED PARTS, WITH ADDITIONAL SPECIFICATIONS HERE: JEIN SPINNER NOZZLE THREE PART (LISTING PHOTO PROVIDES DIMENSIONS) OR (CLICK & JUMP TO GREG JEIN SPINNER P2 PHASER NOZZLE)’ HANDLE BUTT SOLID BRASS PLATE THREE (3) PART KIT (CLICK & JUMP TO HANDLE BUTT PLATE KIT),MIDGRADE FIN. (CLICK & JUMP TO MIDGRADE FIN),ONE SOLID BRASS P1 RELEASE PIN (CLICK FOR BRASS PIN),TOP-TURN BLACK & WHITE STYLE (CLICK & JUMP TO BLACK AND WHITE TOP TURN DIAL),TWO (2) DIE-CUT 5/16” X 0.040 WHITE PLASTIC STATIC BUTTONS,ONE COIN EDGE THUMB-WHEEL, MACHINED, NOT A CAST PART. (CLICK FOR WHEEL),ONE P1 TRIGGER BUTTON (CLICK FOR P1 TRIGGER BUTTON),ONE P1 PRECISION MACHINED EMITTER TUBE (CLICK FOR BRASS EMITTER TUBE),ONE SIDE TURN ASSEMBLY 2 PARTS=BEZEL + TURN KNOB, (CLICK & JUMP) ,P2 NOZZLE ACRYLIC LASER EMITTER (CLICK & JUMP LASER EMITTER),P2 NOZZLE ACRYLIC HERO EMITTER (CLICK & JUMP HERO EMITTER),ONE MIRROR POLISHED ALUMINUM LOCK-PLATE (CLICK & JUMP TO NEW LOCK-PLATE),METAL TRIGGER KIT THREE PARTS, MACHINED ALUMINUM, BRASS SCREW AND NUT, FOR PROP OR LASER-PROP USE (CLICK FOR TRIGGER KIT). METAL PARTS; Prior to use, all Metal Parts MUST be cleaned to remove machine coolant residue. RESIDUE IS NOT VISIBLE AND DOES NOT FEEL OILY, BUT IT IS THERE! Use dish-washing detergent such as Dawn or Palmolive to ensure a clean part.CLICK; EXPLODED PHASER LASER SLIDESHOW; YOUTUBE VIDEO CLICK; AA/DS PHASER-LASER HOW-TO; YOUTUBE VIDEO CLICK FOR WAND PHASER MODIFICATION YOUTUBECLICK; TOS-PHASER FIN FINISHING; YOUTUBE VIDEO CLICK; TOS-PHASER SIDE-RAIL FINISHING; YOUTUBE VIDEO Some Star Trek Prop History For Inquiring Minds: Most of these Prop Makers and Technicians have passed-on.Below are old-timer accounts of convention conversations before conventions were really a fad. (all 2nd hand stories) The persons quoted worked for; the studio. Mr. Bob Stone was Star Trek's machinist and made all the metal prop parts for all three seasons of the show. Parts were made to order for each episode as in those times (the 1960’s) as machining was done by hand and there was no advantage to making short runs (and no studio funding either). Each episode had a specific budget. Speaking of budgets, Bob relied on his Star Trek friend Robert Archer (VP of Budgeting for the show) in getting a little leeway on the $ so he could do the best possible job. According to Bob there was no magic drum of Phaser Nozzles and every job was a mad-dash to meet the filming deadlines.Because parts were made only to order, parts varied quite a bit. These variations can be seen in all the surviving examples of TOS hand props from Phaser to Communicators and Tricorders. Sometimes it was not that a new design was needed but rather that when one Wings it from a sketch, in a hurry using what is on-hand, you get an unintended-new-version of something (in the 1960’s the TV audience never could see that).Robert Archer and Bob Stone worked closely together so when the show was cancelled suddenly in season three, Robert Archer ended up with a nice collection of hand props. Richard Heimer made the molds for hand props. He also did all the casting and forming. This included; Vacuum form bucks, Fiberglass molds and, urethane molds. Again, according to him most work is done in the normal Hollywood maddening rush. He shared with his convention friends that there were many molds made from molds when the production schedule demanded this. He also shared that when the show ended he rescued the molds from being discarded by putting them in his garage. James Ruggs (b. 1919) was the director of special effects for the show. He handled and repaired many of the props on-set. When the show was cancelled in season three he rescued many hand props and even some models from the scrap heap. Dick Ruben, Prop & Art Assistant on the show, got his Set-Used Klingon disruptor from James. Mr. Ruggs held on to his rather large Star Trek collection for many years. It is widely known that Greg Jein got his Holy-Grail Hero Phaser from James. In closing a nod to Mr. Ruck, a prop technician, who reported that he repaired some hand props hundreds of times as they were often damaged during filming. He had also shared that the fiberglass Mid-Grade’s, and some other props often used basswood strips between the seams to establish uniform dimensions. Watch some YouTube Star Trek TOS bloopers to see what he was talking when it comes to repairs and hand props flying apart. The products sold here are all jonpaultrek2012™® & © 2023 works, are all; custom manufactured & engineered. Jonpaultrek2012 And related marks and logos are trademarks of Jonpaultrek2012 LLC. All Rights are hereby explicitly Reserved. United States Patent & Trademark Office Reg. No. 6,431,925.The jonpaultrek2012 company Supports the right to free expression and the value of the copyright. The purpose of the copyright is to encourage writers, filmmakers and artists to produce the creative works that enrich our culture. All scanning, uploading, and distribution of the content of this web posting without permission is theft of the author's Intellectual Property. if you would like permission to use the material from this website (Other than for the intended review purposes) Please contact me for permission. All new products sold on this website are produced under license From: jonpaultrek2012™® LLC, Florida corporation, located in the United States of America.

Price: 98.97 USD

Location: Brooksville, Florida

End Time: 2024-08-17T20:30:49.000Z

Shipping Cost: 5.99 USD