SCULPFUN S30 Pro Max 20W Laser Engraver Cutter Automatic Air-assist 410x400mm

Description: Laser Information: Diode Laser Output Power: 20W (note: that this is light energy, not electrical energy) Laser Focus: 0.08x0.1mm Laser Wavelength: 455±5nm Focusing Method: fixed focus column + sliding device Laser Protection Cover: Equipped with a detachable laser protection cover to protect the eyes. You can adjust it up and down, or remove the goggles Machine Information: Engraving Accuracy: 0.005mm Engraving Area Size: the standard version is 410*400mm, which can be expanded to 935x400mm or 935x905mm Machine Power: about 60W Engraving Area After Installing the Limit Switch: S30: 380x385mm S30 Pro: 380x385mm S30 Pro Max: 370x363mm Air Pump: Type: mainboard-controlled air pump Voltage: 24V Flow: 30L/min Air Hose Inner Diameter: 7.5mm SCULPFUN S30 Pro Max 20W Laser Engraver Cutter, Automatic Air-assist, 0.08*0.1mm Laser Focus, 32-bit Motherboard, Replaceable Lens, Engraving Size 410*400mm, Expandable to 935*905mm Highlights Sculpfun S30 Pro Max Main Features Sculpfun S30 Pro Max equips a 20W quad-diode laser module with a replaceable protective lens underneath that will make it possible to keep your engraver in top condition for many years! Sculpfun S30 Pro Max uses the same focusing method as the brand`s models including the Sculpfun S10 and Sculpfun S9. The laser module is held on a sliding rail with thumbscrews on the back. The focusing is done by setting the correct distance between the laser module and the work material with an aluminum focusing block, which sets the distance to 40mm. The air assist pump of the Sculpfun S30 Pro Max outputs 30 l/min and can be enabled via control software (Lightburn) for only the specified engraving layers. This is great because you can engrave one project that has multiple operations and for example, you can select to turn off the air assist for engraving and turn it on for laser cutting only. The air assist pump already comes with the machine. Automatic Air-assist 0.08*0.1mm Laser Focus 32-bit Motherboard Replaceable Lens Engraving Size 410*400mm Expandable to 935*905mm Automatically Controlled Air Assist System Sculpfun S30 series is equipped with an air-assist 32-bit motherboard and a control-type air pump, which can intelligently control the air-assist switch during engraving through the LightBurn software M8 button, this makes the engraving and cutting very clean, and is very suitable for the manufacture of exquisite gifts. Built-in High-Pressure Air Assist Nozzle S30 series is equipped with an advanced high-pressure air-assisted metal nozzle, which can generate 30L/min high-pressure airflow under the air pump, greatly improving the cutting efficiency, and the cutting speed is more than 5 times faster than that without air assist. Ultra-thin 20W Laser Adopting ultra-thin laser shaping technology, the laser focus of the S30 series is as thin as hair and very powerful for engraving or cutting. The S30 Pro Max 20W pursues the ultimate cutting speed, suitable for professionals, shops, or factories. Replaceable Protective Lens S30 series laser adopts an innovative replaceable lens, which greatly improves the service life of the laser, which is more than 10 times longer than other general lasers. When the lens is damaged or after long-term use, the lens can be replaced to restore the cutting power. Expandable Engraving Area The original engraving area is about 410x400mm, while it features XY-axis expandable design, so you can purchase a Y-axis expansion kit to expand the engraving area to 935x400mm; purchase an XY-axis expansion kit to upgrade up to 935x905mm engraving area, which can help you better handle large area engraving or cutting work. Upgraded 32-bit Air-assist Motherboard The latest 32-bit motherboard supports automatic air-assist control and reserves Bluetooth, and SD card offline printing function. (Upgrade Kit sold separately)Industrial-grade Cutting Accuracy Extremely solid and high-precision linear slide rail X-axis make it reach industrial-grade engraving accuracy. When comparing small engraving details, the S30 series does not have the wavy pattern that appears in ordinary engraving machines. Sturdy and Durable Aluminum Alloy Frame Made of high-strength aluminum alloy, its frame can bear up to 50 kg weight without damage and is very durable. The frame can be used for a long time and maintain high precision, only need to upgrade the latest laser when the machine needs to be upgraded. Safety Design The presented A4 size steel pad can well protect the table from laser damage. There is an eye-catching power switch on the machine, you can directly and quickly turn off the power in an emergency. Right-angle Measuring Ruler There are precise scale lines on the X-axis and Y-axis to form a right-angle measuring ruler, which is convenient for you to quickly measure the size of the engraved object. Note 1. Because of the powerful laser power, it is forbidden to run the engraving machine without being supervised. Pause it if you're not around. 2. For detailed machine instructions, please refer to the manual for parameter settings. 3. When operating the laser engraving machine, please install the laser protective cover; if it is not installed, you need to wear goggles. 4. Do not touch the laser with your hands, otherwise, you may burn your hands. 5. Please avoid a strong impact on the machine. 6. It is forbidden for children under 14 years old to use this product, and children over 14 years old need adult supervision. 7. Do not apply the laser directly to any specular reflection object, which may cause injury to the operator or burn the laser. Specification General Brand: SCULPFUNType: Laser Engraving MachineModel: S30 Pro Max 20WColor: Blue Specification Laser Information:Diode Laser Output Power: 20W (note: that this is light energy, not electrical energy)Laser Focus: 0.08x0.1mmLaser Wavelength: 455±5nmFocusing Method: fixed focus column + sliding deviceLaser Protection Cover: Equipped with a detachable laser protection cover to protect the eyes. You can adjust it up and down, or remove the gogglesMachine Information:Engraving Accuracy: 0.005mmEngraving Area Size: the standard version is 410*400mm, which can be expanded to 935x400mm or 935x905mmMachine Power: about 60WEngraving Area After Installing the Limit Switch:S30: 380x385mmS30 Pro: 380x385mmS30 Pro Max: 370x363mmAir Pump:Type: mainboard-controlled air pumpVoltage: 24VFlow: 30L/minAir Hose Inner Diameter: 7.5mmMotherboard: 32-bit air-assisted motherboard, reserve Bluetooth, SD card offline printing function. (Upgrade Kit sold separately)Engraving Material: all kinds of wood (including walnut, cherry, and other high-density wood), MDF, zigzag, cardboard, plastic, leather, PCB board, aluminum oxide, 304 stainless steel, ceramic, dark stoneCutting Material: all kinds of wood (including walnut, cherry, and other high-density wood), MDF, acrylic board, cardboard, non-woven, bamboo, leather, some plastic boards, PCB boardsOperating Software: LightBurn (with air assist function M8), LaserGRBL, LightBurn, Benbox, GrblController, LiteFire, support Windows system, support MAC systemSupported File Formats: NC, BMP, JPG, PNG, DXF, and other image formatsData Transmission Method: USB connection or Bluetooth wireless connectionPower Input: 100-240V AC, 50/60HZ Power Output: 24V 5A Weight & Size Product Weight: 7kgPackage Weight: 15kgProduct Size(L x W x H): 230*235*625mmPackage Size(L x W x H): 260*500*650mm Package Contents 1 x S30 Pro Max Laser Engraver1 x Laser Repair Kit1 x 12V Automatic Air Pump3 x A4 Size 3mm Wooden Board2 x Limit Switch1 x 12V 5A Power Adapter1 x Power Cord1 x USB Cable1 x Air Tube1 x Installation Tool Kit1 x Laser Goggles1 x A4 Metal Backing PlateSteps 1-6 Install the Package1 x X-axis Assembly2 x X Profiles2 x Y Profiles1 x Control Box Assembly3 x Support Feet1 x User Manual

Price: 854.05 USD

Location: Riverside, California

End Time: 2024-08-09T02:45:32.000Z

Shipping Cost: 0 USD