PICkit2 PICkit3 Microchip Original MPLAB PIC In-Circuit Debugger Programmer US

Description: Categories PICkit2 PICkit3 Microchip Original MPLAB PIC In-Circuit Debugger Programmer USA Description PIC Programming Adapter Installing the microcontroller, 28-pin, 40-pin microcontroller left aligned 28/40P (A) This flag line short-circuit cap on the A position. The 8,14,18,20-pin microcontroller aligned on the left 8P/14P/18P/20P flag line (B), shorting cap on the B position.The ICD2, KIT2, KIT3 crystal head or 6Pin Block programming connection for programming the programming operation. (Note: a separate program of the seat can not be programmed the chip is programmed functions)The seat supports the following programming microcontroller:PIC16/18XX 40PIN Series devices (except 16F59)PIC16/18XX 28PIN Series devices (except 16F57)PIC16/18XX 18PIN Series devicesThe PIC 8PIN/14PIN/20PIN family of devices (except 10FXX) Package Included:1 x PIC ICD2 PICKit 2 PICKIT 3 Programming Adapter Universal Programmer Seat boardPICkit2 Features: 1. the electrical performance: 100% to the original; software features: 100% up to the original (2 shelves) 2. the original firmware , can be assured by the MPLAB IDE download the algorithm, upgrade FW3. the original chip imports tantalum capacitor, import gold-plated connectors (amp or foxconn)4. high-quality transparent new material injection, nicePackage Included:1 x PIC kit2 the main body 1 x USB Cable 1 x 6 Pin CablePICkit3 Features: Full-speed USB support using Windows standard drivers Real-time execution Processors run at maximum speeds MPLAB IDE compatible (free copy included) Built-in over-voltage/short circuit monitor Firmware upgradeable from PC/web download Totally enclosed Supports low voltage to 5 volts (1.8v to 5.0v range) Diagnostic LEDs (power, active, status) Read/write program and data memory of microcontroller Erase of all memory types (EEPROM, ID, configuration and program) with verification Freeze-peripherals at breakpoint Program up to 512K byte flash with the Programmer-to-GoBasic Debugger System:The debugger system can be configured to use standard ICSP communication for both programming and debugging functions.CAUTION: Do not change hardware connections while the PICkit3 or target is powered. Supported Devices:Refer to MPLAB IDE v8.76, the following devices are supported: PIC10FPIC12FPIC16FPIC18FPIC24FdsPIC30dsPIC39dsPIC33dsPIC3211 Series Serial EEPROM Devices11LC/AA010,11LC/AA020,11LC/AA040,11LC/AA080,11LC/AA16024 Series Serial EEPROM Devices24LC/AA/C00,24LC/AA01B, 02B, 04B, 08B,24LC/AA16B, 32A,24LC/AA/FC64, 128, 256, 512,24LC/AA/FC102525 Series Serial EEPROM Devices25LC/AA010A, 020A, 040A,25LC/AA080A, 080B, 160A, 160B,25LC/AA320A, 640A,25LC/AA128, 256, 512, 102493 Series Serial EEPROM Devices25LC/AA/C46A, 46B, 46C,25LC/AA/C56A, 56B, 56C,25LC/AA/C66A, 66B, 66C,25LC/AA/C47A, 76B, 76C,25LC/AA/C48A, 86B, 86CMCP250xx CAN DevicesMCP25020, 25025,MCP25050, 25055 Debugger To Target Communication:Connecting the PICkit3 to the target board through standard ICSP interface using 6-pin connector. The programmer connector pinout is shown in the figure below: PICkit3 Status LEDs:The Status LEDs indicate the status of the PICkit3. Power (green) – Power is supplied to the PICkit3 via the USB port. Active (blue) – The PICkit3 has connection to the PC USB port and the communication link is active. Status: Busy (yellow) – The PICkit3 is busy with a function in progress, such as programming. Error (red) – The PICkit3 has encountered an error. Package Included:1 x PICKit3 PIC KIT3 Debugger Programmer Emulator PIC Controller Development Board PICkit2 PICkit3 Microchip Original MPLAB PIC In-Circuit Debugger Programmer USA Description PIC Programming Adapter Installing the microcontroller, 28-pin, 40-pin microcontroller left aligned 28/40P (A) This flag line short-circuit cap on the A position. The 8,14,18,20-pin microcontroller aligned on the left 8P/14P/18P/20P flag line (B), shorting cap on the B position.The ICD2, KIT2, KIT3 crystal head or 6Pin Block programming connection for programming the programming operation. (Note: a separate program of the seat can not be programmed the chip is programmed functions)The seat supports the following programming microcontroller:PIC16/18XX 40PIN Series devices (except 16F59)PIC16/18XX 28PIN Series devices (except 16F57)PIC16/18XX 18PIN Series devicesThe PIC 8PIN/14PIN/20PIN family of devices (except 10FXX) Package Included:1 x PIC ICD2 PICKit 2 PICKIT 3 Programming Adapter Universal Programmer Seat boardPICkit2 Features: 1. the electrical performance: 100% to the original; software features: 100% up to the original (2 shelves) 2. the original firmware , can be assured by the MPLAB IDE download the algorithm, upgrade FW3. the original chip imports tantalum capacitor, import gold-plated connectors (amp or foxconn)4. high-quality transparent new material injection, nicePackage Included:1 x PIC kit2 the main body 1 x USB Cable 1 x 6 Pin CablePICkit3 Features: Full-speed USB support using Windows standard drivers Real-time execution Processors run at maximum speeds MPLAB IDE compatible (free copy included) Built-in over-voltage/short circuit monitor Firmware upgradeable from PC/web download Totally enclosed Supports low voltage to 5 volts (1.8v to 5.0v range) Diagnostic LEDs (power, active, status) Read/write program and data memory of microcontroller Erase of all memory types (EEPROM, ID, configuration and program) with verification Freeze-peripherals at breakpoint Program up to 512K byte flash with the Programmer-to-GoBasic Debugger System:The debugger system can be configured to use standard ICSP communication for both programming and debugging functions.CAUTION: Do not change hardware connections while the PICkit3 or target is powered. Supported Devices:Refer to MPLAB IDE v8.76, the following devices are supported: PIC10FPIC12FPIC16FPIC18FPIC24FdsPIC30dsPIC39dsPIC33dsPIC3211 Series Serial EEPROM Devices11LC/AA010,11LC/AA020,11LC/AA040,11LC/AA080,11LC/AA16024 Series Serial EEPROM Devices24LC/AA/C00,24LC/AA01B, 02B, 04B, 08B,24LC/AA16B, 32A,24LC/AA/FC64, 128, 256, 512,24LC/AA/FC102525 Series Serial EEPROM Devices25LC/AA010A, 020A, 040A,25LC/AA080A, 080B, 160A, 160B,25LC/AA320A, 640A,25LC/AA128, 256, 512, 102493 Series Serial EEPROM Devices25LC/AA/C46A, 46B, 46C,25LC/AA/C56A, 56B, 56C,25LC/AA/C66A, 66B, 66C,25LC/AA/C47A, 76B, 76C,25LC/AA/C48A, 86B, 86CMCP250xx CAN DevicesMCP25020, 25025,MCP25050, 25055 Debugger To Target Communication:Connecting the PICkit3 to the target board through standard ICSP interface using 6-pin connector. The programmer connector pinout is shown in the figure below: PICkit3 Status LEDs:The Status LEDs indicate the status of the PICkit3. Power (green) – Power is supplied to the PICkit3 via the USB port. Active (blue) – The PICkit3 has connection to the PC USB port and the communication link is active. Status: Busy (yellow) – The PICkit3 is busy with a function in progress, such as programming. Error (red) – The PICkit3 has encountered an error. Package Included:1 x PICKit3 PIC KIT3 Debugger Programmer Emulator PIC Controller Development Board

Price: 7.03 USD

Location: JAMAICA, NY

End Time: 2023-12-16T03:15:02.000Z

Shipping Cost: 0 USD