Nooelec NESDR XTR+ RTL-SDR USB Receiver Set w/ TCXO, RTL2832U & Elonics E4000 US

Description: Welcome to NooElec @ eBay! eBay Store Coupons Return Policy Shipping Policy Payment Policy Product Details Manufacturer NooElec Model NESDR XTR+ NooElec SKU 100666 Quantity NESDR XTR+ USB dongle w/ TCXO MCX-connected antenna baseTelescopic antenna mastRemote control Technical Details Installation Guide & Software RTL-SDR Project RTL-SDR Subreddit Applications Software defined radio, DVB-T, ADS-B Interface IC Realtek RTL2832U Tuner IC Elonics E4000 Clock Accuracy 0.5PPM (max) Instantaneous Bandwidth 2.4MHz (nominal); 3.2MHz (max) Frequency Range 65MHz-2300MHz (nominal) Antenna Input Female MCX Dimensions (SDR Only) 43mm x 20mm Product Information About the NESDR XTR+ Meet the NESDR XTR+ ! XTR stands for 'eXtended Tuning Range'. Containing an ultra-rare E4000 tuner chip, these devices are capable of receiving frequencies all the way up to 2300MHz. As with other SDRs, the exact frequency range capability varies somewhat from unit to unit. As a 'plus' version, this model contains an ultra-high-accuracy, GPS-rated, made in Japan +/- 0.5PPM TCXO. What does that mean? Rock-solid short and long term tuning accuracy, in nearly any temperature range. Nifty! And, like our other 'plus' model SDRs, it comes standard with a 2-year warranty against manufacturer defects. Your investment is further protected by dual ESD protection on the antenna input, to ensure that stray ESD cannot affect the sensitive RF circuitry. About the E4000 For those who are unaware, the maker of the E4000 integrated circuit, Elonics, went out of business years ago. As a result, E4000-based USB sticks are very hard to find. Yes, these are REAL E4000-based SDRs...guaranteed! NooElec purchased the remainder of the E4000 integrated circuit in limited quantities. Once these are sold out they will not be available again, anywhere. Comparisons An excellent comparison of the E4000 tuner vs. the R820T tuner was done by a 3rd party, HB9AJG. In short, the E4000 excels at frequencies below 450MHz, whereas the R820T performs better at frequencies above 450MHz. He did not perform testing above 1040MHz. Of course, most R820T-based SDRs cannot receive properly over 1200MHz, and none can receive over 1700MHz properly. In terms of size, the NESDR XTR is closer in size to the NESDR Nano series than the NESDR Mini series. The shell is 43.0mm in length (excluding male USB plug), 20.0mm in width, and 10.0mm in depth. An important advantage of the XTR is its lower power consumption, which can be critical for portable and embedded applications. The XTR has a current draw of approximately 170mA at 5v DC, approximately half of the power consumption of R820T and R820T2-based devices. Frequency Capability: It is important to note that E4000 has a 'gap' in it's frequency capability, around 1100MHz-1200MHz range (the exact location of this gap varies from device to device). We would not recommend this dongle if you are interested in receiving ADS-B (1090MHz). Our R820T and R820T2-based NESDRs are better suited for that purpose. However, for HF & MF (with an upconverter like our Ham It Up, available in our store), VHF, and UHF above 1500MHz, the XTR is a better-performing unit. SDR Details This custom NooElec SDR is an RTL2832U-based USB dongle tuned for SDR usage. The integrated 0.5PPM TCXO ensures tuning accuracy in nearly any environmental conditions. The perfect device for learning software defined radio, on the cheap. Amateur radio, police & fire scanning, trunking, satellite images--you name it, this little guy can probably do it. Outperforms many devices 10x its cost! The NESDR XTR+ are based on the E4000 tuner IC made by Elonics. As such, they have a frequency capability of approximately 65MHz-2300MHz, with a gap near 1100-1200MHz, though this can vary somewhat from unit to unit. There is also an RTL2832 (RTL2832U) IC on board, which acts as the demodulator and USB interface. The set includes a quality telescopic metal antenna, the same upgraded antenna included with the NESDR Mini 2 packages. The connector type on the antenna and USB board is MCX--male MCX on the antenna, female MCX on the SDR. There are plenty of adapter and adapter cables available in our store if you want to connect your favorite antenna!Software Details Full compatibility with a large array of software packages, such as MATLAB®, HDSDR, SDR Touch, SDR#, Planeplotter--too many to list.. MathWorks® and NooElec™ have coordinated to bring MATLAB® support for our SDR receivers. The RTL-SDR radio support package enables you to design wireless receivers using real world signals. Using Communications System Toolbox™ in conjunction with an RTL-SDR USB radio, you can design and prototype systems that process real-time wireless signals in MATLAB® and Simulink® Wireless engineers, students, and hobbyists can learn to receive and decode real-world radio signals using this low cost RTL-SDR hardware connected to your computer.Want More? Want HF too? You can modify the dongle for HF reception, but performance and frequency capability will be quite limited. If you would like to do this please contact us and we'll be happy to walk you through it. However, we strongly recommend you take a look at the Ham It Up, which will let you listen all the way down to 100kHz or lower with impeccable sensitivityAbout Us We know software defined radio, and know it well. We support our products. We warranty our products. Perhaps most importantly, we understand our products. We are always glad to help customers who have technical questions.Unmatched performance--unmatched support.

Price: 35.95 USD

Location: Niagara Falls, New York

End Time: 2024-02-29T21:02:55.000Z

Shipping Cost: 2.87 USD