NEW Strike Industries QUAD Micro Pistol Comp for 1/2-28 Barrel (9mm/357 SIG)

Description: Product Features: Micro compensator that can work with just about any size slide using barrel with 1/2”-28 TPIBuilt-in anti-rotation system using front tip of guide rod (when applicable)Wide front wall baffling redirects gas to mitigate felt recoil and reduce muzzle riseSecure tight fitment with easy timing clamp style designSI styling which matches most OEM and aftermarket slides on the marketDesigned to work with micro, sub-compact, compact and full size pistolsMade from S45C steel with HRC40-45 heat treatment and black oxide finishPackage Includes:x1 Strike Micro Threaded Comp – QUADx1 Set screw [M4x12mm]x1 Torx tool [T20] The QUAD is a pistol compensator from the Strike Micro Threaded Comp (SMTC) line that can work with just about any size slide using a threaded barrel with 1/2"x28 TPI. The wide front wall baffling redirects gas to mitigate felt recoil and reduce muzzle rise. SI internal testing has typically seen a reduction average range (dependent on application) of 15-30% in felt recoil. This QUAD version in the SMTC line has a built-in anti-rotation system using the front tip of the pistol guide rod for most applications other than pistols with a flush guide/recoil rod system. With the clamp style design on the SMTC QUAD, timing the comp is simple including a secure and tight fitment. Originally designed for smaller compact, sub-compact and micro sized pistols, the SI styling of this QUAD pairs aesthetically well with most OEM and aftermarket slides on the market including full size pistols. Made from S45C steel with HRC40-45 heat treatment and a black oxide finish, the Strike Micro Threaded Comp – QUAD offers a smaller threaded barrel compensator option for your pistol with SI style. WARNING: For barrels with no shoulder, the o-ring included with this compensator will not work and cannot be used to help with timing. Please use Loctite® Threadlocker Red to secure compensator to barrel but apply an appropriate amount and not too much. Check this compensator as part of your routine maintenance. All installations must be done by a certified professional gunsmith only and properly tested to pass all safe and function tests. WARNING: Due to reduction of slide energy, recoil spring tuning might be required when using this compensator COMPATIBILITY: Any barrel with 1/2”x28 TPICalibers: 9mm and .357 SIG NOT COMPATIBLE: Built-in anti-rotation system may not work with pistols using flush guide/recoil rod systemsTorque: Set screw to exactly 40 in/lbs (4.5 Nm) WARNING: Due to the reduction of slide energy, recoil spring tuning will be required when using this compensator

Price: 62.9 USD

Location: Hayward, California

End Time: 2024-10-27T08:33:00.000Z

Shipping Cost: N/A USD