Membrane Switch Pad for Sequential Circuits Prophet-600 Click Tactile switch

Description: Replacement Membrane Switch Pad S-061 for Sequential Circuits Prophet-600 synthesizerReproduction for restoration purpose. You will receive a revised "Clickable type tactile switch pad" with grey ribbon cable. Soft touch switch such as SCI Prophet-600 original style membrane switch pad is available upon request. Very easy to replace. No special tools need. Please look at our product carefully. Width of lines and letters are original size. Color of WHITE. White is real WHITE. Please let me know telephone number (and Email) for shipping label (Japan Post or FedEx), when you proceed payment. Will be shipped with Japan Post Small Packet Air Registered or FedEx with tracking number. Please request us to ship with couriers for quicker delivery. How to remove/install the membrane switch pad 1. Remove 4 screws on the top of both of side panels. 2. Lift control panel up. 3. You will find a ribbon cable. Pull off the ribbon cable from the socket. No tool is needed.4. Return the control panel. Remove a SPEED knob. Just pulling up. 5. Pry the four corners of the switch pad with a scraper or putty knife and peel it off. 6. Rub the surface of the rest of adhesive with a soft cloth soaked in gasoline or "GOO GONE" to soften it, and then scrape it with a scraper of a putty knife. It will take one hour +.7. Clean the surface. 8. Remove the backing paper of the new switch pad, pass the ribbon cable through the slit, and pull it out to the back side.9. Position it according to the SPEED pot and the display window, and stick it so that the top and bottom are parallel. 10. Insert the end of the ribbon cable to the socket. No tool is needed. 11. Put the SPEED knob as before. An useful site: dittomusik. p600keypadfix.html

Price: 45.5 USD

Location: Tokyo

End Time: 2024-07-24T08:54:10.000Z

Shipping Cost: 11.75 USD