Low Back Vinyl Bucket Seat, Driver Side, Black, w/Seat Mount

Description: PROCAR LOW BACK BUCKET SEAT: TIG-welded steel tubing with injection-molded foam creates a reliable and long-lasting bucket seat., COMFORTABLE RIDE: Adjustable incline and recline repositions for your preference. The seat back will also fold forward for easy access to the rear of the vehicle., FITMENT DETAILS: These bucket seats are 24" tall, 20-1/2" wide and 22.5" deep overall., MOUNTING DIMENSIONS: Assembled dimensions of 15-1/2-inches wide by 17-1/2-inches deep. Seat mount kit with sliders has an assembled height of 7 inches Seat frame mounting bolt hole pattern is 14-1/4-inches x 18-inches center-to-center., EASY INSTALLATION: Complete kit includes everything to install bucket seats into most early cars and trucks with flat floors. Dual locking ball bearing seat sliders for smooth seat Low Back Vinyl Bucket Seat, Driver Side, Black, w/Seat Mount Sku # 9101254 Mfr. Part # 9101254 Condition New Brand Speedway Motors Sold Kit Details Info Seat If you are like us, it's hard to find bucket seats small enough to fit in your car. These bucket seats are 24" tall, 20-1/2" wide and 22.5" deep overall and the back adjusts to your preference. The seat back will also fold forward for easy access to the rear of the vehicle. Each seat includes a pair of sliders, but universal mount each or pair is sold separately. Sliders included Floor mounts shown in photo diagram for installation purposes are not included and are sold separately as # pair or each TIG-Welded steel tubing Injection-molded foam Adjustable Incline & Recline At front of seat, 7-3/4" from mounting plate to top of cushion At rear of seat, 5-1/2" from mounting plate to top of cushion Seat bottom features female threaded mounting holes with the following dimension that corresponds to the included seat sliders: 14-1/2" center to center spacing for side to side bolt pattern 11-9/16" center to center spacing for front to back bolt pattern Seat mount Complete kit includes everything to install bucket seats into most early cars and trucks with flat floors Dual locking ball bearing seat sliders for smooth seat adjustment and positive retention Seat sliders provide 7 inches of front-to-rear adjustment for driver/passenger comfort Seat mounting frame constructed of 1-inch OD tubular steel with .813-inch OD cross bars for strength Frame can be modified for custom installations by cutting the legs down and welding Seat mount kit with sliders has an assembled height of 7 inches Assembled dimensions of 15-1/2-inches wide by 17-1/2-inches deep Includes all fasteners and spacers to mount seat plates to sliders and sliders to frame Does NOT include fasteners to mount seat frame to vehicle Seat frame mounting bolt hole pattern is 14-1/4-inches x 18-inches center-to-center Make Those Long Hauls Comfortable There is nothing like getting out on the open road and taking a trip in your hot rod. Multi-state events where you are behind the wheel for several hours at a time mean your driving position must be one of comfort and control. Having the seat positioned just right, a tilt steering column, and proper pedal placement are all key to enjoying the ride and not arrive at your destination feeling like a pretzel. Tilt steering columns are an easy upgrade, and we offer to make that upgrade to your vehicle. Same goes for our huge selection of gas and brake pedal assemblies. So, when it comes to getting your aftermarket seats just right in your early hot rod, don't sweat it, we have you covered there too with our Universal Seat Mount and Slider Kit. Universal Seat Mount Works Best With Flat Floors But Can Be Modified to Fit With a mounting bolt pattern of 14-1/4-inches x 18-inches center-to-center the steel tube frame in our Universal Seat Mount and Slider Kit will fit most any flat floor of an early pre-war car or pickup truck. Order a pair of these and update your classic ’40s or ’50s bench seat ride to a pair of buckets, providing more support and comfort and room to add a center console! Of course, if your ride’s floor is not totally flat a little cutting and welding will allow our steel tube frame to conform to just about anything. Shorten the legs or lengthen the legs as needed to get just the right seat position you are looking for. On flat floor installations our kit should work as delivered with little to no modifications. However, some customers may feel the seat height is too tall, and in these instances cutting the universal seat mounting frame down to your desired working height will be your best course of action for a comfortable driving position. We include all hardware to mount the seat sliders and seat mounting flanges to the steel frame and even include 1/2-inch steel spacers for clearance between the seat and sliders so that the slider mechanisms work properly without binding. This provides a 7-inch overall height to the assembly, which is not usually a problem in early hot rods or pickup trucks with a completely flat floor. However, you will need your own seat mounting hardware (often included with the seat) and hardware to mount the steel tube frame to your floor. Includes All Major Components to Mount Your Bucket Seat Our Universal Seat Mount and Slider Kit begins with our universal seat brackets built from a 1-inch OD round tube steel frame with .813-inch OD cross bars for strength and support. These steel tube frame bucket seat mounting brackets are 5 inches tall and are designed for early hot rods and pickup trucks with a low and flat floor pan area, unlike later cars of the ’60s and ’70s that utilized welded-in-place automotive seat risers. If your vehicle’s floor is not completely flat the frame can be cut and modified/welded to fit your exact needs. Included is a seat slider kit which features a pair of ball-bearing supported seat sliders with mounting hardware. These universal seat sliders allow up to 7 inches of seat movement to give you that Goldilocks feeling of sitting just right; not too close, or not too far from the steering wheel and pedals. Seat sliders are the perfect upgrade for easier rear seat access as well. The adjustable seat sliders feature individual locks for each side controlled by a single hand lever, making seat adjustments quick and easy without that “seat wiggle” a single locking seat sider can cause. They bolt directly to our bucket seat mounting brackets. Our Universal Seat Mount and Slider Kit also includes a pair of universal seat mounting plates to aid in facilitating the seat to slider/frame mounting. Depending upon the seat used there may be some drilling required of the plates or possibly additional mounting hardware required, so it is best to mock everything up on your workbench before mounting the steel frame base in your ride. If you are looking for universal seat mounting kit with brackets and sliders to mount your aftermarket bucket seats into an early hot rod with a flat floor, this is the kit for you. Specs Sold in Quantity Kit Color Black Material Type Vinyl Overall Height 24.00 Overall Width 20.50 Depth 20.00 Travel 8.00 Weight 24 Seat Style Lowback Bucket Seat Layback Adjustable Back Position Front Passenger Side Inside Width 21.00" MFG. Part # 9101254 Related Items / Suggested Parts Low Back Vinyl Bucket Seat, Passenger Side, Black, w/Seat Mount Tech Support We're here to help before and after your purchase. If you have a question or need assistance with one of our products, please contact us through eBay Messaging and a knowledgeable Speedway Motors team member will be happy to help. About Speedway Motors is America’s Oldest Speed Shop® and has been a trusted source for specialty rodding and racing products and friendly expert advice for more than 72 years. Founded in 1952 by “Speedy” Bill Smith – a racer and street rodder himself – Speedway has grown from a one-man operation to become the world’s largest manufacturer, distributor and retailer of street rod and racing products. Our industry-leading fast delivery is the result of same-day shipping from our state-of-the-art, centrally located 500,000 sq. ft. headquarters. Speedway’s size offers customers unmatched product selection and low pricing, while our excellent technical support and customer service have made us a recognized leader in the rodding and racing industries.

Price: 366.99 USD

Location: Lincoln, Nebraska

End Time: 2024-08-07T15:50:22.000Z

Shipping Cost: N/A USD