Description: In good condition, tested and working, supplied as pictured in a protective case with various accessories. Huge range of options as per pictures. Please carefully read the detailed description below re what is included in the sale. Included in the sale:Viavi JDSU ONT-600 / 603D Platform - 3076/01 - AC-0082 - Rev. 640/100G CFP2 DUAL PORT ModuleCFP2-Electrical Adapter - 3076/92.90CFP4 in CFP2 (4x25G Optics) Adapter - 3076/92.92QSFP28 in CFP2 Adapter - 3076/92.9340GBASE - LR4/OTU3 Transceiver - 3061/92.93Huber+Suhner MF53/1x8A_21MXP/21SK_erg/152 (84093980) x5Operating Manual & CDCable for external CFP2 MDIO control : K001 Unless pictured or listed above, any other CFP/Transceiver/Accessory is NOT included, please ensure it is suitable for your needs before purchase, you cna of course purchase additional parts separately. ONT-603The VIAVI ONT Product Family supports testing and verification for new high-speed network elements across a wide range of technologies and scenarios. Our test platforms help manufacturers scale to meet the growth demands of network-driven services, while accounting for ever-evolving technology.All application modules share the same GUI and identical automation and scripting, so that they can be used throughout the product development cycles.ApplicationsDetailed hardware level testing with unframed and protocol based traffic.25G, 50G, 100G and 400G Optical Modules validation: electrical lanes stressing (clock offset variation, TX pre-emphasis and RX equalization manipulation, dynamic skew) per IEEE standards, MDIO/I2C management interface verification (peek/poke, HW pins control, MDIO/I2C Dump)Support for OTN, Ethernet, Fibre Channel, CPRI, and SONET/SDHQualify PTP (IEEE 1588) implementations in optical networks and equipmentFull service disruption and latency measurements for all supported technologiesEquipment Manufacturers: Support for R&D, SVT (system verification/test), and production environments covering the entire product life cycleService Providers: Conduct product qualification and benchmark testing before deployments and bring to the field for first office applications (FOA)Data Centers: Fully verify data center interconnect elements and long-haul transmission elements for quality and performance and fully stress and verify pluggable optics including active optical cables.Key FeaturesMultiple mainframe options including rackmount, desktop, and modules with built-in display for mobile test needs.Supports testing of all major transport technologies for equipment manufacturers, service providers, and data centersOTN: up to OTU4 with ODU Muxing down to ODU0; ODUflex, ODU multichannel, and FlexOEthernet: Gigabit Ethernet up to 400 GE and FlexE fully supported with full stress/margin analysisSDH/SONET: 155 Mbps up to 40GFibre Channel: 1/2/4/8/10/16G FCCPRI unframed and framed testing: CPRI line bit rate option 1 (614.40 Mbps) up to option 9 (12.165 Gbps)Most accurate latency and service disruptions measurements for OTN, Ethernet, CPRI, Fibre Channel, and SONET/SDHBrowser-oriented graphical user interface (GUI)Full multitasking operationFull automation support via CLI or with drivers and libraries for LabWindows CVI, LabView, Python and Tcl/TkThe VIAVI ONT 100G solution?s flexible design enables quicker and more thorough testing using less equipment. Three modules are available: the CFP version for validating CFP-related products and system equipment, the CFP2 version for deep analysis of CFP2-related products and systems, and the cost-effective dual-port CFP2 version for deeper system testing and a special test application for sophisticated test signals. The CFP-based test module is an indispensable tool for product development, system verification, and new service deployment testing. The industry?s first CFP2 test module, with its advanced error analysis application, gives designers unprecedented insight into the root causes for bit errors and greatly reduces CFP2 technology cost, space, and development time. The dual-port CFP2 module produces up to 1.2 T of real-time traffic when fully loaded into the ONT-612 mainframe.BenefitsEnables the development of 100G products based on CFP and CFP2 technologiesQuickly identifies root causes for bit errorsFully evaluates CFP and CFP2 transponder?s true performance, including tolerance to skew variation?the world?s only solution for testing dynamic skewEvaluates multichannel performance up to 32 times faster than traditional single-channel methodSaves on CapEx with broadest mapping and multiplexing testing supportImproves test efficiency with intuitive GUI design and strong automation supportApplicationsValidate CFP2, CFP and QSFP+ transponder validation and testValidate 40 G/100G Ethernet Layers 1-2-3 Develop and validate OTN (OTU3/OTU4)Test 100 G routers with OTU4 client interfacesAssess signal integrity in both photonic and electronic domainTurning up and deploying servicesKey FeaturesAdvanced CFP2, CFP, and QSFP+ testingUnique CFP and CFP2 stress test application and CFP2 error analysis applicationDynamic skew variation40 GE, 100 GE, OTU3/3e1/3e2, OTU4, and STL-256.4OTU4 with 100 GE client and OTU3 with 40 GE transcoded into OPU3100 G wrapper/de-wrapper testing with built-in or external 100 GE trafficODU0 and ODUflex up to OTU4OTN multistage multiplexingOTN multi-channel testingGFP-T and GFP-F mapping for OTNElectrical connectivity with adaptors for component-level testing
Price: 11995 GBP
Location: Blackburn
End Time: 2024-03-11T22:54:48.000Z
Shipping Cost: 372.7 GBP
Product Images
Item Specifics
Return postage will be paid by: Buyer
Returns Accepted: Returns Accepted
After receiving the item, your buyer should cancel the purchase within: 14 days
Return policy details: We strictly only accept returns on items which are clearly not as described , this must be within 14 days of delivery. It is your responsibility to ensure you have reviewed all images and read the description before any purchase, furthermore you must check that the instrument being purchased is suitable and compatible in your home market, this can be done by reviewing the manufacturer data sheet or hand book. We do NOT accept returns on items sold in the condition FOR PARTS . Returns for any other reason will result in you incurring inbound and outbound shipping costs as well as a potential re-stock fee.
Brand: JDSU
Cable Length: Not Applicable
MPN: ONT-600
