HPI Nitro Savage X almost RTR 1/8th scale monster truck

Description: Used Nitro Savage X it has NO radio, or receiver.This truck has sat on my shelf for years in a stable climate controlled environment. Steering servo is a metal geared one (I forgot the brand as it was put in years ago, and I can't see the label without taking it apart)It has an Integy tank guard, a RPM skid plate installed, and RPM upper control arms as the original ball end would pop out on occasion. The engine is a Force .26 which I bought new years ago, and I ran less then half a gallon of nitro through it after breakin. The piston was stored at BDC, and it turns freely when the pull start is pulled. It will need a new air filer as the one I have on it is old, and stretched out. Other then that it is untested as I have no nitro fuel to test it with, nor do I know where the glow plug warmer went that I used. It has some scratches on it, and the body has a small crack near the window basically typical wear and tear for this type of truck. To make it run you will need fuel, a radio, foam air filter, a glow plug warmer, and possibly a glowplug as I don't know if it is still good.

Price: 375 USD

Location: Highland, Indiana

End Time: 2024-08-27T20:59:13.000Z

Shipping Cost: N/A USD