Description: Spa Heater Element Side Terminals Style, Flo-Thru Hot Tub Heating Coil 2.5kw 230/115v, new side terminal Flo-Thru heater element, Incoloy 800 sheath, Stainless bulkhead fittings, large sealing o-rings, bulkheads are epoxy sealed on the backside too. Rated 230 volts 2.5kw AND 115 volts 0.6kw. Heater housing gaskets (2) included.2.5kw is ideal for applications where available amperage is limited, as in European tubs, and smaller hot tubs. Compatible with Balboa M-7 type heaters, where the overall length must be 9.9" or less and must have the correct terminal placement. Certified, guaranteed good resistance and thorough ground fault tested, prior to shipping. Over 31 electrical tests performed. Includes 2 new heater housing gaskets, standard size for flanged flo-thru heaters, in translucent Santoprene elastomer. Can be run on 230v as 2.5kw (2500 watts) or on 115v 0.6kw (625 watts), fits many flo-thru heaters requiring side terminals, Balboa M-7, Gecko, Acura controls as welll as Morgan, Brett, and many others. Includes an installation guide with tips on proper heating element startup (VERY important!). Sized for 2.25" diameter flo-thru heater housings with 1-1/4" terminal spacing, with 1/2" bulkhead holes in housing, these are all very common, standard dimensions. Overall length of this element is approximately 9-3/4". Not for housings smaller than 2.25" outside diameter, not for terminal spacing other than 1-1/4", not for hole size other than 1/2" terminal holes in housing, and not for replacing elements with centered terminals, please note. If you have a need for some other style or size, message us with those details please. For a proper fit you need your heater housing to conform to the details listed which again are: Stainless Steel Housing outside diameter must be 2.25" (2-1/4 inch) Housing hole size for terminals must be 1/2 inch. Housing hole spacing must be 1-1/4 inch center to center. Housing must require an element with terminals offset to one side. Housing must require an overall element length of approximately 9-3/4 inch. Instructions are included, please read and follow the instructions! VERY IMPORTANT: Please be very careful on startup procedure, do NOT put power to the heater until after the pump has run a good 10 minutes or more on high so all air is out of the system!! In other words, do not turn up the temperature until you run the pump 10 mins on high speed by pressing the jets button. Shipping via ground is included in the price, and tracking will be uploaded to eBay for you. Thanks for looking! Questions, message us please, we are here to help :)
Price: 28.5 USD
Location: Los Angeles, California
End Time: 2024-09-29T11:08:59.000Z
Shipping Cost: 0 USD
Product Images
Item Specifics
Return shipping will be paid by: Buyer
All returns accepted: Returns Accepted
Item must be returned within: 30 Days
Refund will be given as: Money Back
Type: Electrical Part
Brand: Spa Pumps And More
