Description: We are Located in North Carolina All service performed by Degreed Electrical Engineers with over 46 years of experience designing and servicing Tube and Solid State equipment and Tube Testers. Bought a Hickok Military series TV-10 tube tester on Ebay? Now what? It is most likely out of calibration like 99% of them being used. Our Company CTech Electronics will calibrate your tester according to Hickok standards, with (2) calibration tubes as a reference. The service assumes a working unit. The calibration consists of: Check operation of all switches and check tube sockets, clean and tighten as required Check meter operation for sticking, zero set and full scale sensitivity. Adjust as required. Replace all Electrolytic capacitors (as required at extra cost). Check all other capacitors and replace as required Check fuse lamps Check neon bulbs and operation of short detection circuitry Check the 5Y3GT and #83 tubes Calibrate all voltages according to Military factory calibration procedures using a high accuracy voltmeter with proper impedance Make All POT adjustments Lightly clean front panel and case Check the unit with a variety of good and bad power and small tubes Provide a checklist and instructions on how to use the newly calbrated shunt dial. Your unit will operate as accurately as it possibly can. The calibration cost does not include the cost of any required parts replacement/labor, or labor needed to unsolder and resolder the halves of the shunt/english control to put the unit back into alignment. There is generally a $45.00 additional charge for this service. You will be notified if this is the case There will be an additional charge if parts need to be replaced. Most times this is not required to get the unit to calibrate, if the unit is in working condition. Typical turn around is generally 5-7 working days. The shipping calculator is a place holder on return shipping. We will determine shipping when the unit is done. We prefer Paypal. If you agree to replacement parts, we will bill you for the parts and labor via PayPal. In the event your unit can't be calibrated, or you decide you don't want to do it because of parts needed, you only pay a 90.00 bench fee and return shipping, and the balance of your payment will be refunded We are degreed Electrical Engineers and have been in the Audio and Electronic business for 30 years. We are also avid audiophiles. Check my feedback and bid with confidence. Please double box your tester and ship fully insured with tracking. If you have just purchased one off Ebay, have it shipped directly to us first, to save shipping charges. Your box will be used for return shipping. If your box is damaged, there will be a nominal charge fo packing and materials. Please include contact information in you package, as well as a description of what you think is wrong with your tester if other than calibration issues. We also service B&K and all other brands of Testers as well. See our Ebay store. We are a full service company offering parts, tubes, equipment and repair services. Please shop our Ebay store.
Price: 269 USD
Location: Jamestown, North Carolina
End Time: 2024-10-21T17:28:39.000Z
Shipping Cost: 1 USD
Product Images
Item Specifics
All returns accepted: ReturnsNotAccepted
Country/Region of Manufacture: Unknown
MPN: Does Not Apply
Brand: Hickok
