1997-2013 CORVETTE Billet Oil Catch Can Technology Voted #1

Description: 1997-2013 CORVETTE BILLET OIL CATCH CAN SEPARATOR ( UPR Catch Cans include $20 Nickel Fittings for FREE ) Part Number: 5032-020 MFG Retail: $ 169.99 Item Finish: Satin Fits Models: Corvette - LS1 LS2 LS3 LS6 LS7 Z06 Fits Years: 1997 1998 1999 2000 2001 2002 2003 2004 2005 2006 2007 2008 2009 2010 2011 2012 2013 Items Included: * Billet Catch Can inventory in stock and ready to ship * 6oz Capacity ($20 upgrade FREE) UPR Nickel Fittings ($20 upgrade FREE) UPR Angle Bracket UPR Billet Catch Can UPR HP Braided Hose ($40 upgrade FREE) UPR Patented Diffuser Upgrade ($40 upgrade FREE) New 4.6 inch Tall x 2.75 inch Top x 2.5 inch tapered bottom Knurled easy-open easy-close design that you just snug to close CHECK OUT the UPR Catch Can Installation Instruction section on our website What is the problem with your PCV system ? The Positive Crankcase Ventilation (PCV) system is used to recycle the gases that leak or “blow-by” the your engines piston rings and create a positive pressure in the crankcase. By venting these gases along with oil mist/vapor from the crankcase and route it back into the intake manifold so it can be burned off. This is a poor fix from automobile manufacturers, because over time the excess oil vapor collects along the inside of the intake tract and forms a “sludge”. This leads to a variety of issues including carbon build up, retarded timing, detonation, power loss and even engine failure. UPR s fix for the PCV system used on many engines for reducing toxic gases from being released into the atmosphere and eliminating positive crankcase pressure / Blow-By. What does a UPR Catch Can do ? UPR s Billet Catch Can / oil-air separator will condense and collect the oil vapor before it has any chance to reach the intake tract. As the gas and oil vapor enters UPR s can they pass through a Chambered filtering system that cools the oil vapor and gives it something to adhere to. Then the oil forms into droplets and collect in the bottom of the UPR Catch Can so that they can later be drained. This is where the additional Chambered filtering system comes into play allowing only the clean air to pass through so it can eliminate unwanted blow by. All engines have blow by otherwise there would be no need for a PCV system on your engine. PCV = Positive Crankcase Valve, which eliminates Positive Crankcase Pressure. UPR s Catch Can has become one of the most widely used and recommended cures for just about every application. The engine size and horsepower level is not relevant to the performance of the UPR Catch Can. UPR s Catch Can has become a cornerstone by improving the Performance and Economy on any vehicle you install it on. Installation Instructions ( See images for installation help ) 1. Remove the factory passenger fuel rail cover. 2. Passenger side front intake you'll see a 11/32 hose from the intake to engine its the crank case to intake, remove that hose. 3. Locate the bolt in the front of the passenger side cylinder head at the top, the only thing this bolt holds up is a ground wire. 4. Remove that bolt (13mm socket) from the head. 5. Connect the two 3/8” lengths of hose to each of the barbed fittings on the catch can. 6. Attach the mounting bracket to the top of the car with the provided allen head bolt. 7. Using the provided bolt mount the catch can to the front of the head with the barbs facing the engine. 8. The round spacer goes between the bracket and cylinder head. Make sure the ground strap stays attached to the head. 9. Connect each 3/8” hose to the port on the intake and valley cover port (see listed pictures). 10. The UPR can does not have an in and out so it doesn't matter which hose is connected to which port 11. Double check your connections, level the catch can and tighten the mounting bolt. 12. Press the fuel rail cover back into place and the installation is complete. * Z06 Install Notes * You will delete the petcock drain and insert a plug in the bottom, also move the mounting bracket from the block about 2.5 inches down the canister. This is what is needed to clear the AC line routing.

Price: 129.99 USD

Location: Lake Worth, Florida

End Time: 2023-12-19T19:19:58.000Z

Shipping Cost: 0 USD