Description: THIS FOR FOR THE GAUGE ASSEMBLY PICTURED AND DOES NOT INCLUDE ANY REFRIGERANT. 134 Charging Gauge Assembly J.B. Industries Part# M2-460 Includes a cap and strap for the hose connection as pictured! We will also get two adapters; (1) 1/2" ACME Female Flare 134 x 1/4" Male Flare 12 (1) 1/4" Female Flare 12 x 1/2" ACME Male 134 Made for the 30 and 15 pound refrigerant jugs. This one is for the jugs of 134 This is a very special gauge set up that will screw onto, by hand, to the 30 lb. or 15 lb. jugs of refrigerant cans that have the 1/4" male flare fitting and allow you to direct charge the system you are working on. You don't even have to take the jug out of the box anymore! NOTE: Almost "ALL" of these size cans have the 1/4" male flare fitting, the only can that does not is the automotive jugs of 134 that say "automotive 134", those jugs have the 1/2" ACME fitting which is a little larger then the 1/4". This particular gauge is set-up for the following flavor, 134 If you shut the tank valve off it will show you the system pressure. You don't need to take your whole gauge set on the roof now just throw this in your pocket and you good to go. It comes with a nice screw-in plug to keep it clean and a cap & strap for the hose connection to keep that fitting clean as well. We have the same set-up with different hose lengths as well. Please note, the sticker and the refrigerant can is NOT included in the , this is for the gauge set-up only! Please visit our eBay store and click on the can taper category. Thank you!
Price: 42 USD
Location: Hartford, Wisconsin
End Time: 2024-12-08T19:09:57.000Z
Shipping Cost: 5 USD
Product Images
Item Specifics
Returns Accepted: ReturnsNotAccepted
Brand: JB Industries
Manufacturer Warranty: Yes
Manufacturer Part Number: M2-460
