Description: Engine starter button bezel Cover Trim Accessories for Jeep Wrangler JL JT 2024 *Fitment* : Compatible For Jeep Wrangler JL Gladiator JT 2024 *Specifications* : Condition: 100% Brand New Size: As The Picture Is Shown Material: High-quality ABS Plastic *Package Include* : 1x Console Engine Starter button Cover TrimEngine starter button bezel Cover Trim Accessories for Jeep Wrangler JL JT 2024*Attension* :1. Cause the same car model may be differently produced in different countries.2. Please ensure the part of your car like our picture shows, or it will not fit, if any differences, please contact us before purchase, thanks3.We're a small business and without your feedback and reviews, we can’t exist.Your Feedback is so important to us!If you think we've done a good job, I would really appreciate it if you would leave us your positive feedback.If you're not satisfied, before leaving negative feedback. Let us make it right. Email us and we will do whatever it takes to make you happy. *Fitment* :Compatible For Jeep Wrangler JL Gladiator JT 2024 *Specifications* :Condition: 100% Brand NewSize: As The Picture Is ShownMaterial: High-quality ABS Plastic *Package Include* :1x Console Engine Starter button Cover Trim *Installation Guide*: Step 1: Please clean the place and make sure that there is no dust.Step 2: Remove the adhesive in the back;Step 3: Heat the glue with heat gun or hair dryer; (One tip to wear with the included tape is to heat the covers, which makes the glue sticky on the tape.)Step 4: Install the products in the right place. Do not wash your car within 48 hours.Note: Please do not wipe the surface with alcohol.Alcohol can corrode the back glue and cause the product does not to stick. Installation methodShipping PolicyReturns PolicyFAQContact usInstallation method 1. Pls use alcohol or an agent to clean the position of the installation (to make sure it is without the grease. Wax or dust etc.) 2. Pls ensure the position of installation can be completely fit the case before installation, (Note: if there any questions or misfit, please contact us) 3. Due to the weather is getting colder, if meet the case of a relatively low temperature, please rive the strong double-sided adhesive of the back , and heat it via the hairdryer or lighter. 4. According to the comparison stick up it and press for about 1-2 minutes (Note: do not wash your car in 24hours, the adhesive should be fixed after 12 hours ) 5. The installation has been completed, DIY item --- Easy to installShipping Policy The item will be shipped within 24 hours on payment received except the holidays.(except weekends & official holidays). You can log on to eBay to check your logistics tracking number. We use multiple warehouses for delivery and will select the nearest warehouse for delivery, according to your order address and our inventory. Shipped via USPS, UPS or FedEx (depending on location and package weight) Please confirm address before purchase, and cannot change address once purchased.Returns Policy Please contact us first when return, exchange and refund is required. Any direct return of purchased items will not be processed. If the product is defective or damage upon arrival,please contact us immediately,we will provide the solve the problem. Returns accepted within 30 days of delivery date and item must be in original new condition. When returning an item, it must be in all of the original packaging and include all of the original accessories or items that came with it. The item and package should be in original and perfect condition.FAQ♥ If you have any other problems, please contact us first, we will help you with it. We will reply you within 24 hours in working days. I'm a new seller, thanks a lot for your trust and convince! I will serve you with all my heart. ♥ Q1: Will this items fit my vehicle? A: We can match almost any vehicle on the compatibility table at the top of our listings to one of our products sizes.But if your vehicle does not show up on the compatibility table at the top of our listings, welcome you to contact us for free consulation before purchasing a product. Q2: My item has not arrived, what's taking so long? A: Sometimes items take longer than expected, especially if it’s going far or to rural area. Check with your post office to see if your item has been held up. Sometimes USPS/UPS will not update a tracking number until it has arrived at its destination. If your item still don't arrive after a few days, let us know so we can double check for you and help solve it asap. Q3: My items won't fit, help! A: Due to the region or model, there will be differences in the size of the car parts, resulting in not completely suitable. If not fit, let us know. Q4: Product is non-stick! A:This problem may be because the weather is getting cold, causing the tape to dry and do not stick.But it is very easy to fix by using a hairdryer to heat the tape for a few minutes before installation,or by replacing or adding some double side tape. If it still not work, please contact us,we will help you with it. Contact us 1. Negative & neutral feedback will not help resolve any problems you have, please contact us via eBay messages before leaving negative & neutral feedback, our customer service will make best effort to help you with the issues. 2. We hope to give you a positive eBay experience by working hard, and we expect to receive a positive feedback and Detailed Selling Rating (DSR) of 5 Rating in ALL of the feedback categories (Item as described, Communication, Shipping Time and Shipping and handling charges) from the buyer upon receiving the item . 3. If you are not satisfied with our items or service, please don't hesitate to contact us before you leave any Neutral/Negative feedbacks, we will always try our best for 100% customer satisfaction.
Price: 12.99 USD
Location: HongKong
End Time: 2024-02-19T07:07:00.000Z
Shipping Cost: 0 USD
Product Images
Item Specifics
Restocking Fee: No
Return shipping will be paid by: Seller
Returns Accepted: Returns Accepted
Item must be returned within: 30 Days
Brand: SHINEKA
Manufacturer Warranty: 1 Year
Material: Plastic
Type: Center Console Trim
Fitment: For Jeep Wrangler JL Gladiator JT 2024
Manufacturer Part Number: SHINEKA231107L8330
Fitment Type: Direct Replacement
Brand Type: Aftermarket Branded
Placement on Vehicle: Center Console
Package include: 1x Console Engine Starter button Cover Trim
Features: Durable, Easy Clean, Easy Installation, Scratch-Resistant, Self-Adhesive, Waterproof
Finish: Polished
OE/OEM Part Number: 231107L8330
Available Variations
Color: Carbon fiber
Price: 13.99 USD
Available Quantity: 30
Quantity Sold: 1
Color: Red Carbon fiber
Price: 12.99 USD
Available Quantity: 30
Quantity Sold: 0
Color: Red
Price: 12.99 USD
Available Quantity: 30
Quantity Sold: 0
Color: Green
Price: 12.99 USD
Available Quantity: 30
Quantity Sold: 1
Color: Light Blue
Price: 12.99 USD
Available Quantity: 30
Quantity Sold: 0
Color: Blue
Price: 12.99 USD
Available Quantity: 30
Quantity Sold: 0
Color: Purple
Price: 12.99 USD
Available Quantity: 30
Quantity Sold: 0
Color: Orange
Price: 12.99 USD
Available Quantity: 30
Quantity Sold: 0
Color: Yellow
Price: 12.99 USD
Available Quantity: 30
Quantity Sold: 0
Color: Pink
Price: 12.99 USD
Available Quantity: 30
Quantity Sold: 0
Color: White
Price: 12.99 USD
Available Quantity: 30
Quantity Sold: 1
Color: Silver
Price: 12.99 USD
Available Quantity: 30
Quantity Sold: 1