DIY KIT IN-14 Arduino Shield NCS314-4 Nixie Clock WITH TUBES Shipping 3-5 Days

Description: DIY KIT IN-14 Arduino Shield NCS314-4 Nixie Shield for Arduino UNO or MEGA This Item will be deliverd by UPS fast delivery within 3-5 business days same business day shipping DIY KIT for IN-14 Shield Nixie Clock with ColumnDeveloped for 4 IN-14 xUSSR Nixie Tubes with SocketsIN-14 Tubes are the most popular mass-produced Nixie TubesNixie Clocks are one of the most beautiful and popular Vintage ClocksClocks features Startup Tune, RGB backlight, USB port for updatesDIY KIT developed for Tubes Shield Board and Control Arduino BoardOptions include Tubes, Column, Sockets, Arduino, Power SupplyAccessories include Temp. sensor, GPS Receiver and RemoteDIY KIT is made for Arduino UNO and MEGA 2560 Control BoardsIt allows you to write your own uniqe programs for the Arduino platformAll the latest Source codes are always available on our GitHub channelPCB, Design, Schematics, Case and Software made by GRA & AFCH This is example of assembled IN-14 Arduino Shield NCS314-4 Nixie Tubes Clock with Column and Arduino UNO Listing includes: Tubes Shield (NCS314-4) Bare PCBSet of Electronic Parts and Components for Shield (NCS314-4) BoardSet of Screws and Spacers for Shield and Arduino BoardsIN-14 Nixie Tubes – 4 pcsNE2H Neon Bulbs for Dot – 2 pcs (one spare)Principal Electrical Scheme on paperBOM List for Shield (NCS314-4) BoardUser Manual on a Vintage style paper Listing contains only BARE PCB, Set of Tubes and full Set of Electronic and other PartsListing DOES NOT contain Arduino Board, Column and Power Supply We offer optional Parts and Accessories for Arduino Nixie Clocks:We are selling already flashed Arduino UNO: (Uno) ebay.com/itm/162377278951Flashed Arduino Mega: (Mega) ebay.com/itm/162377285626Power Supplies: ebay.com/itm/162367596648Glass Column: ebay.com/itm/162276387248GPS Receiver GA-6: ebay.com/itm/162682147400IR Remote Controller RM-X153: ebay.com/itm/162682141139 Dear customers!If you have ANY questions, PLEASE ASK us. Software Features: Shield supports IN-14 Nixie tubes – 4 pcs.Date format: [DD:MM]; 12/24 hour format: [HH:MM].Full static display mode.Slot Machine (Anti poisoning – tubes saving function. Increases the service life).Temperature measurement [Celsius or Fahrenheit]. Digital temperature sensor (DS18B20, optional not included).GPS time synchronization (requires a standard GPS receiver, NMEA protocol, 5 V power supply, optional, choose in selector).Operation via IR remote control (Remote control Sony RM-X151, optional not included).Automatic information refreshing on the tubes.The maximum possible brightness of the tubes.Unique RGB LED backlight with 16,7 million colors. Your can choose any constant color off backlight LED and memorize it. Or you have option for a cyclic full spectrum color change!Switching on/off LED backlight in the matter of seconds.As alarm sound clock uses standard RTTTL (Nokia format) melodies, so You can easy change it. (included songs: Mission Impossible, We Wish You…).Easy updating firmware via USB using Arduino IDE.Power On Self-Test (POST): LED backlight, tubes and sound. You can check firmware version at the end. Unique detailed tube test – our soft check each segment on every lamp. Distinguishable to see segment failure. Hardware Features: Highly Accurate RTC (Real Time Clock) DS3231SN with backup battery.Integrated high voltage power supply: 150 – 220V.High voltage adjusting potentiometer.3 control buttons on board.8 pcs RGB SMD LEDs.3 PWM channels for RGB LEDs 8 bit per channel = 24bit = 16,7 million colors. It can be disabled in the menu (see manual).Internal buzzer.Test points for testing, adjusting and controlling low and high voltage circuits.Plug for optional external GPS receiver (only with Arduino Mega).IR receiver TSOP4836 for optional IR remote controllers (In case of using Arduino UNO, they may conflict with “Tone” library). If you plan to use remote control, we strongly recommend the using of Arduino MEGA – works fluently.3 pin connector for optional Temperature sensor (DS18B20; 1-Wire protocol).SPI up to 4MHz.Places for 2 column with 2 neon dots (digits separator).Independent controls for upper and lower dots.Power consumption: 12V, 760mA. Recommended: 12 VDC, not less than 1A. Power supply connector dimensions: 5.5 x 2.1mm (center pin positive “+”).Reverse polarity protection.Nixie Tubes Shield NCS314 PCB size: 200mm x 53.34mm. (7.87 x 1.2 in) Our Benefits: Easy to build beautiful clock – we also offer the case.Easy to customize firmware under Your own needs, thanks to an open platform – Arduino.Fast uploading via USB.The latest version of the firmware is always available on GitHub.No need for additional drivers – we are use only Genuine USB to serial converters. Drivers for them are pre-installed in all popular OS: Windows, MacOS, Linux.Human friendly menu.Very high quality product, made to lasts.Complete Power On Self-Test (POST): LED backlight, tubes and sound. Unique circumstantial tube test.Competent Technical support. IN-14 Shield NCS314-4 Electrical Scheme: IN-14 NCS314-4 Arduino Shield References: NCS314-4 Shield Board Top Bare PCB: NCS314-4 Shield Board Bottom Bare PCB: NCS314-4 Shield Board Top Populated PCB: NCS314-4 Shield Board Bottom Populated PCB: DIY KIT for NCS314-4 Shield: IN-14 Arduino Shield Nixie Tubes Clock by GRA & AFCH: User Manual Dear customers!If you have ANY questions, PLEASE ASK us Shipping and Return information All Items are shipped from UkraineVia International registered AirmailShipments are made within 1 business dayAfter the payments are received and verifiedIt takes about 4-7 days via UPS Express deliveryIt takes about 10-18 days via Standerd shippingIt takes about 35-45 days via Economy shippingWe combine multiple Items to save on shipping UPS Express Shipping time (recommended):Europe:3-5 daysGermany:3-5 daysUSA, Canada:4-7 daysAsia, South America:5-7 daysAustralia, New Zeland:5-7 daysAfrica, Central America:5-7 days Standard Shipping time:Europe:10-12 daysGermany:10-12 daysUSA, Canada:10-15 daysAsia, South America:10-18 daysAustralia, New Zeland:12-18 daysAfrica, Central America:12-18 days Economy Shipping time:Europe:25-30 daysGermany:25-30 daysUSA, Canada:30-35 daysAsia, South America:35-45 daysAustralia, New Zeland:45-55 daysAfrica, Central America:45-55 days Return PolicyAll Returns are acceptedFor Return you should contact Us within 14 Days after receiving the ItemRefunds are made as Money back or Replacements (buyer’s choice)Return Shipments are paid by the buyerNo restocking fees are charged

Price: 119.95 USD

Location: Dnipropetrovsk

End Time: 2024-07-28T18:56:17.000Z

Shipping Cost: 18.95 USD