Chrysler, Dodge 48RE Deep Transmission Pan, Extra Capacity, HD

Description: 48RE Heavy Duty Deep Transmission Pan with 2 Quarts Extra Capacity a Cast Aluminum finish. This pan is only one inch deeper than the stock pan to maintain clearance on most vehicles. A magnetic drain plug and all mounting bolts are included with the pan. This pan has been designed for:Cooling - extra capacity(2 quarts above stock), fins, and aluminum construction for reported temperature drops of 10 to 35 degreesClearance - medium height maintains clearanceDrain Plug - on the side for safetySecure Seal - machined flat gasket flange for a leak free sealStrength - high quality aluminum, thick wallsFins on bottom of pan for additional clearanceDesigned to work with the stock filter and gasketThis pan has been installed in the following vehicles:1989 to 2007 Dodge Ram 1500, 2500, and 3500 trucks with 5.9 Cummins diesel or V10 enginesSome Dodge trucks with V8 gas engines from the late 1960’s until 20012WD Durango with 5.9 V82WD Dakota with 5.9 V8Some V8 powered Ram vansThis transmission pan works with these Dodge TorqueFlite transmissions:727, A727 (36RH, 37RH)518, A518 (46RH, 46RE)618, A618 (47RH, 47RE)48REConfigurations vary so always check your vehicle. This transmission has 14 bolts holding the pan on. For 2007 and newer 6.7 Cummins diesel trucks, please see our RFE deep transmission pans. Four wheel drive Durango & Dakotas will likely have exhaust and frame clearance problems with a deeper pan.This pan is designed to work with the stock filter and gasket. The interior of the pan has a filter supports cast into the bottom, no filter extension is needed. This pan is one inch deeper than stock and there is plenty of mixing of fluid due to vehicle movement as well as the fluid being sucked into the filter and returned from the oil cooler to prevent a stagnant layer at the bottom. The filter and oil level are at the same location with the PML pan and the stock pan. A NAME YOU CAN TRUSTAs an industry veteran in the transmission parts supply business, you can buy with confidence. Our goal is to provide high quality parts, an experienced sales force, and the highest levels of product availability possible.Important InformationShippingReturnsCore PolicyImportant InformationShippingReturnsCore Policy As a buyer, it is your responsibility to verify that this product is compatible with your application. For any general questions, technical support, or to verify part fitment please send us a message. Our support is free, and we typically respond within minutes. Your order will be shipped within 1 business days (MON-FRI excluding holidays) of receiving payment and you should expect to receive it five to seven days via US Postal Service or UPS Ground Standard Shipping unless another shipping method is chosen. In addition to UPS Ground, we offer expedited services as well as local pick-up. Please contact us if a quote is needed and we will be happy to work with you. Please Note: All packages valued at over $500 WILL require a signature upon delivery. If your package arrives damaged, please do not open and contact us immediately. If your package is returned by the carrier due to address errors, you will be responsible for the shipping cost. International Customers: Please make sure you monitor your package. Any import duty/taxes must be paid by the buyer. If you do not pay in a timely fashion your package will be returned. You will not receive a refund for the returned items until they’re delivered. Shipping fees will not be reimbursed. 30 Day return policy for unused, uninstalled items. Any product you return must be in the same condition you received it and in the original packaging. If you’re having an issue with a used or remanufactured item and it’s been installed, we require the buyer to contact us immediately so we can provide trouble shooting information. Worst case scenario if that fails, exchange only. Certain item such as used items, tools, and one time use items are not eligible for return. As a buyer, it is your responsibility to verify that this product is compatible with your application. If you ordered the wrong item for your application YOU are responsible for the return shipping. 20% Restocking Fee May Apply If you are purchasing an item in which a core charge is required, please be sure your contact information is current. If core charge is not paid within 1 week of purchase, your order will be cancelled. Upon receiving your new part, there will be a prepaid shipping label included so you can return your core (old part) to us free of charge. Please make sure to use the label we send you. You have 14 days to ship your core back to us from the time your new part was delivered. If you do not ship the core within 14 days, you WILL LOSE YOUR REFUNDABLE CORE CHARGE. Exceptions are possible, BUT YOU MUST contact us to make us aware of the situation. ATTENTION INTERNATIONAL BUYERS: Due to the inflation of shipping costs, we are unable to pay for the return shipping on the core. If you want the core charge refunded, you will have to pay for shipping. We apologize for any inconvenience this may cause. Once your core is delivered, please allow 3-5 business days for your refund to be processed. See our other items48RE Heavy Duty Deep Transmission Pan with 2 Quarts Extra Capacity a Cast Aluminum finish. This pan is only one inch deeper than the stock pan to maintain clearance on most vehicles. A magnetic drain plug and all mounting bolts are included with the pan. This pan has been designed for: ---Cooling - extra capacity(2 quarts above stock), fins, and aluminum construction for reported temperature drops of 10 to 35 degrees ---Clearance - medium height maintains clearance ---Drain Plug - on the side for safety ---Secure Seal - machined flat gasket flange for a leak free seal ---Strength - high quality aluminum, thick walls ---Fins on bottom of pan for additional clearance ---Designed to work with the stock filter and gasket This pan has been installed in the following vehicles: ---1989 to 2007 Dodge Ram 1500, 2500, and 3500 trucks with 5.9 Cummins diesel or V10 engines ---Some Dodge trucks with V8 gas engines from the late 1960’s until 2001 ---2WD Durango with 5.9 V8 ---2WD Dakota with 5.9 V8 ---Some V8 powered Ram vans This transmission pan works with these Dodge TorqueFlite transmissions: ---727, A727 (36RH, 37RH) ---518, A518 (46RH, 46RE) ---618, A618 (47RH, 47RE) ---48RE Configurations vary so always check your vehicle. This transmission has 14 bolts holding the pan on. For 2007 and newer 6.7 Cummins diesel trucks, please see our RFE deep transmission pans. Four wheel drive Durango & Dakotas will likely have exhaust and frame clearance problems with a deeper pan. This pan is designed to work with the stock filter and gasket. The interior of the pan has a filter supports cast into the bottom, no filter extension is needed. This pan is one inch deeper than stock and there is plenty of mixing of fluid due to vehicle movement as well as the fluid being sucked into the filter and returned from the oil cooler to prevent a stagnant layer at the bottom. The filter and oil level are at the same location with the PML pan and the stock pan. 48RE Heavy Duty Deep Transmission Pan with 2 Quarts Extra Capacity a Cast Aluminum finish. This pan is only one inch deeper than the stock pan to maintain clearance on most vehicles. A magnetic drain plug and all mounting bolts are included with the pan. This pan has been designed for:Cooling - extra capacity(2 quarts above stock), fins, and aluminum construction for reported temperature drops of 10 to 35 degreesClearance - medium height maintains clearanceDrain Plug - on the side for safetySecure Seal - machined flat gasket flange for a leak free sealStrength - high quality aluminum, thick wallsFins on bottom of pan for additional clearanceDesigned to work with the stock filter and gasketThis pan has been installed in the following vehicles:1989 to 2007 Dodge Ram 1500, 2500, and 3500 trucks with 5.9 Cummins diesel or V10 enginesSome Dodge trucks with V8 gas engines from the late 1960’s until 20012WD Durango with 5.9 V82WD Dakota with 5.9 V8Some V8 powered Ram vansThis transmission pan works with these Dodge TorqueFlite transmissions:727, A727 (36RH, 37RH)518, A518 (46RH, 46RE)618, A618 (47RH, 47RE)48REConfigurations vary so always check your vehicle. This transmission has 14 bolts holding the pan on. For 2007 and newer 6.7 Cummins diesel trucks, please see our RFE deep transmission pans. Four wheel drive Durango & Dakotas will likely have exhaust and frame clearance problems with a deeper pan.This pan is designed to work with the stock filter and gasket. The interior of the pan has a filter supports cast into the bottom, no filter extension is needed. This pan is one inch deeper than stock and there is plenty of mixing of fluid due to vehicle movement as well as the fluid being sucked into the filter and returned from the oil cooler to prevent a stagnant layer at the bottom. The filter and oil level are at the same location with the PML pan and the stock pan. A NAME YOU CAN TRUSTAs an industry veteran in the transmission parts supply business, you can buy with confidence. Our goal is to provide high quality parts, an experienced sales force, and the highest levels of product availability possible.Important Information As a buyer, it is your responsibility to verify that this product is compatible with your application. For any general questions, technical support, or to verify part fitment please send us a message. Our support is free, and we typically respond within minutes. Shipping Your order will be shipped within 1 business days (MON-FRI excluding holidays) of receiving payment and you should expect to receive it five to seven days via US Postal Service or UPS Ground Standard Shipping unless another shipping method is chosen. In addition to UPS Ground, we offer expedited services as well as local pick-up. Please contact us if a quote is needed and we will be happy to work with you. Please Note: All packages valued at over $500 WILL require a signature upon delivery. If your package arrives damaged, please do not open and contact us immediately. If your package is returned by the carrier due to address errors, you will be responsible for the shipping cost. International Customers: Please make sure you monitor your package. Any import duty/taxes must be paid by the buyer. If you do not pay in a timely fashion your package will be returned. You will not receive a refund for the returned items until they’re delivered. Shipping fees will not be reimbursed. Returns 30 Day return policy for unused, uninstalled items. Any product you return must be in the same condition you received it and in the original packaging. If you’re having an issue with a used or remanufactured item and it’s been installed, we require the buyer to contact us immediately so we can provide trouble shooting information. Worst case scenario if that fails, exchange only. Certain item such as used items, tools, and one time use items are not eligible for return. As a buyer, it is your responsibility to verify that this product is compatible with your application. If you ordered the wrong item for your application YOU are responsible for the return shipping. 20% Restocking Fee May Apply Core Policy If you are purchasing an item in which a core charge is required, please be sure your contact information is current. If core charge is not paid within 1 week of purchase, your order will be cancelled. Upon receiving your new part, there will be a prepaid shipping label included so you can return your core (old part) to us free of charge. Please make sure to use the label we send you. You have 14 days to ship your core back to us from the time your new part was delivered. If you do not ship the core within 14 days, you WILL LOSE YOUR REFUNDABLE CORE CHARGE. Exceptions are possible, BUT YOU MUST contact us to make us aware of the situation. ATTENTION INTERNATIONAL BUYERS: Due to the inflation of shipping costs, we are unable to pay for the return shipping on the core. If you want the core charge refunded, you will have to pay for shipping. We apologize for any inconvenience this may cause. Once your core is delivered, please allow 3-5 business days for your refund to be processed. See our other items 48RE Heavy Duty Deep Transmission Pan with 2 Quarts Extra Capacity a Cast Aluminum finish. This pan is only one inch deeper than the stock pan to maintain clearance on most vehicles. A magnetic drain plug and all mounting bolts are included with the pan. This pan has been designed for:Cooling - extra capacity(2 quarts above stock), fins, and aluminum construction for reported temperature drops of 10 to 35 degreesClearance - medium height maintains clearanceDrain Plug - on the side for safetySecure Seal - machined flat gasket flange for a leak free sealStrength - high quality aluminum, thick wallsFins on bottom of pan for additional clearanceDesigned to work with the stock filter and gasketThis pan has been installed in the following vehicles:1989 to 2007 Dodge Ram 1500, 2500, and 3500 trucks with 5.9 Cummins diesel or V10 enginesSome Dodge trucks with V8 gas engines from the late 1960’s until 20012WD Durango with 5.9 V82WD Dakota with 5.9 V8Some V8 powered Ram vansThis transmission pan works with these Dodge TorqueFlite transmissions:727, A727 (36RH, 37RH)518, A518 (46RH, 46RE)618, A618 (47RH, 47RE)48REConfigurations vary so always check your vehicle. This transmission has 14 bolts holding the pan on. For 2007 and newer 6.7 Cummins diesel trucks, please see our RFE deep transmission pans. Four wheel drive Durango & Dakotas will likely have exhaust and frame clearance problems with a deeper pan.This pan is designed to work with the stock filter and gasket. The interior of the pan has a filter supports cast into the bottom, no filter extension is needed. This pan is one inch deeper than stock and there is plenty of mixing of fluid due to vehicle movement as well as the fluid being sucked into the filter and returned from the oil cooler to prevent a stagnant layer at the bottom. The filter and oil level are at the same location with the PML pan and the stock pan.

Price: 450 USD

Location: Shepherdsville, Kentucky

End Time: 2024-01-21T20:21:36.000Z

Shipping Cost: N/A USD