Artist Series Prestige-330 Acoustic Guitar Pickup System From JJB Electronics

Description: Please select the desired transducer size and options from the drop-down menu above. This system is available with an optional, discreet, thumbwheel style volume control. This can be selected by using the drop-down menu above. This is typically mounted just inside the soundhole, or under the pickguard in mandolin applications. The volume control is easily installed by use of a durable, pre-applied, 3M double stick adhesive tape. If you select this option, you will also be provided with a self-adhering cable mount to help with cable management within the instrument. The 15mm configuration is designed for more resonant guitars or ones with thinner soundboards. Both systems have a very similar tone but the smaller system provides a little less output than the bigger sized system. In many cases this slight difference is negated by the higher resonance of a smaller bridgeplate. As a general rule of thumb, if you have a mid-gradeor better, solid top, steel string acoustic guitar, the 15mm option is likely to be your best option. The 20mm size is the best option for 12 string guitars as well as high-string setups. Either size can be used with or without a preamp with fantastic results. This system utilizes a triple surface transducer design. This results in a very wide frequency range and very natural reproduction of sound. The three-piezo configuration offers a few advantages over single and double piezo systems. Having three piezo’s affords you the opportunity to place them at three different points on the soundboard thus resulting in an improved dynamic range due to the fact that they transmit the resonance found at more than one point. These special surface transducers are under less pressure than under saddle pickups thus decreasing the likelihood of them transmitting a percussive or harsh sound. Each piezo is designed to pick up a string pair as well as the resonance found in a significantamount of the soundboard. These do not fade or distort at high volume or with high-power systems. The highs are crystal clear while the lows are what they should be, low! All of our products feature quality components and construction. These utilize a premium quality Switchcraft style 1/4” nickel plated end-pin jack. This system will give you a veryclean install for those who do not want to compromise the integrity of their beloved instrument. The end-pin jack also doubles as a strap button. These, like all of our systems, can beinstalled in about an hour. They are a very simple and inexpensive means of turning your acoustic instruments in to acoustic electric.

Price: 49.99 USD

Location: Bay City, Michigan

End Time: 2024-02-23T18:33:37.000Z

Shipping Cost: 2.49 USD