Antlion ModMic Wireless Oversize Battery Cover

Description: Upgrade your Antlion ModMic Wireless with this oversize battery cover that supports up to a 600mAh LIPO 503040 battery. This is a simple and easy way to extend the battery life of your ModMic Wireless by up to 200%. This kit includes the plastic battery expansion cover and a black spacer to fill the air gap between the new battery cover and PCB. Nothing else is included, so you will need to purchase your own battery and be handy with a soldering iron. The entire modification takes about 5-10 minutes and you will reuse the original screws and magnet. NOT COMPATIBLE "YET" WITH MY MAGNETIC CHARGING STAND AS LISTED HERE: https://www.ebay.com/itm/364186363096?mkcid=16&mkevt=1&mkrid=711-127632-2357-0&ssspo=VRXuVgsLTK6&sssrc=2047675&ssuid=VRXuVgsLTK6&widget_ver=artemis&media=COPY Features:Extends battery life by up to 200%Fairly simple to installReuses original screws and magnet Compatibility:Antlion ModMic Wireless To install the Antlion ModMic Wireless Oversize Battery Cover:Remove the original battery cover and battery. Use a soldering iron to disconnect the battery from the PCB.Transfer the magnet from the original battery cover to the new oversize battery cover.Place the included spacer on the PCB. There should be enough adhesive left over from the battery removal to let it stick, but it's not crucial.Solder the new battery to the PCB.Install the new battery into the oversize battery cover and secure it with the original screws. Once the modification is complete, you will enjoy up to 200% more battery life from your Antlion ModMic Wireless. Liability Disclaimer:This product is intended for experienced users only. Basic soldering skills are required. The manufacturer assumes no liability for any damage or injury caused by the installation or use of this product.

Price: 15 USD

Location: New Auburn, Wisconsin

End Time: 2024-03-01T00:49:28.000Z

Shipping Cost: N/A USD