Description: Adjustable Main Jet Kit for Mikuni VM24 and VM26 The adjustable main jet kit will fit any Mikuni VM24 or VM26 carburetor with a float bowl gasket identical with the one in pic 1 and which uses a hex type main jet.Please be aware: An adjustable main jet will do no magic to a badly jetted carburetor. It is just a time saving tool facilitating the quest to find the correct main jet size, nothing more. Neither will it have any significant effect below 3/4 throttle openings. Once installed, however, you will find it indispensable. It gives you the possibility to make jetting corrections in a fraction of a second when weather conditions alter or you ride at different altitudes. It saves you from the time consuming dismantling of the float bowl every time you need to change main jet.INSTALLATION PROCEDURE Remove the float bowl from your carburetor. Remove the hex main jet and replace it with the o-ring adapter included i the kit. Apply a small amount of Loctite Purple (low strength threadlocker) on the threads then fasten it finger tight. Now smear a drop of oil on the o-ring and let the float bowl slide onto the carburetor and assemble. Please note that the pink hose must be routed through the loop of the float bowl pointing upwards (pic 2). This have two purposes 1) it will act as a fuel level indicator and 2) it prepares for any future power jet installation (pic 5) Please note that the pink hose must be routed through the loop of the float bowl pointing upwards (pic 2). This have two purposes 1) it will act as a fuel level indicator and 2) it prepares for any future power jet installation.Set the adjusting screw so that it corresponds to the main jet size you know is correct from before (see the chart below) and open it an extra half of a turn! Warm up the engine and go for a ride. Accelerate from mid throttle position in 3d or 4th gear and check the respons. If it is to rich go for a stand still and turn the adjuster clockwise a tad and go for a ride. Repeat until you notice where it responds best and you are able to ride in WOT without any lean tendencies. Better a tad rich than too lean. Approximate corresponding settings for the adjustable main jet (hex 4/042)1/4 = #60 1/2 = #1103/4 = #140 1 = #1701 1/4 = #2101 1/2 = #2501 3/4 = #3002 = #350 The charges shown in the item listing are not neccessarily final. Import fees may be added according to each country’s regulations.
Price: 137 USD
Location: Gothenburg
End Time: 2024-01-11T19:25:57.000Z
Shipping Cost: 14 USD
Product Images
Item Specifics
Return shipping will be paid by: Buyer
Returns Accepted: Returns Accepted
Item must be returned within: 14 Days
Refund will be given as: Money back or replacement (buyer's choice)
Brand: Braigasen
Type: Adjustable Main Jet Kit
Warranty: 6 Month
Manufacturer Warranty: 6 Months
Items Included: All you see in the pic
Manufacturer Part Number: flhst-003
Item Length: 3 in
Country/Region of Manufacture: Sweden