3/8" Gun Holster Accessory Screws & Nuts Hardware

Description: What's Included? The threaded portion that extends beyond the base of the washer is 3/8" long. What you receive depends on what you select in the "How Many Sets Do You Want?" options field above. You will receive exactly the number of sets you select. A "set" is a screw & washer + nut pair that includes 1 screw and 1 pronged nut, as shown in the photos. Each order will also include 1 properly sized hex / allen key for tightening and loosening the screw. This hardware is sourced to match the standard specs in dimensions, thread length, stainless steel material, and black finish. This makes our hardware a compatible alternative for the Safariland applications listed below. The only notable differences are the screw portion consists of two components (a screw + cupped washer) and the screw's allen hex key drive is slightly smaller, but an appropriately sized hex tool will be included. The 3/8" size is ONLY good for certain applications. If your application isn't confirmed in the photos, or below, then see the 1/2" screw listing for other applications using a longer screw. The holster accessories (receivers, forks, holsters, belt loops, magazine holders, belts, leg shrouds, etc) are shown or referenced as examples and are not included. What Do These Fit? First, it is important to note these 3/8" screws are not long enough for applications which have spacers or rollers between the screw and nut and certain 1/2" screw applications. However, below are examples of known, valid applications based on hundreds of successful orders. Belt Loops, Paddles, or Clips <-- to --> QLS, MLS, ELS Receiver, or Universal Flex Adapter These 3/8" screw goes through the belt loop, belt clip, or belt paddle, such as: Belt Paddle: 568BL Belt Loops: Regular: 565BL, 566BL, 567BL Universal Belt Loops: 6070UBL (mid-ride), 6072UBL (hi-ride), 6075UBL (low-ride) Cantable Belt Loops: 6070CUBL (mid-ride), 6072CUBL (hi-ride), 6075CUBL (low-ride) Vertical Belt Loop: VUBL-1-2 , VUBL-1-2-2 Belt Clips: 744BL, 745BL Note: if you have a 1/8" or 1/4" spacer, then see the longer 1/2" screw applications. and thread into the nut that seats in one of the following: QLS - Quick Locking System receiver plate (6004-22, 6004-22L) MLS - MOLLE Locking System receiver plate (6004-17, 6004-18) ELS - Equipment Locking System receiver plate (6004-35) mounts vertically using two holes when matched to a belt clip only mounts near 45° or near horizontal when lined up against a three hole pattern Universal Flex Adapter (6004-UFA) using the upper nut holes Two-hole Leg Shroud <-- to --> ELS Receiver These 3/8" screws are long enough to pass the two-hole accessory pattern on either of the leg shroud's outer edges, such as with: 6004, 6005, 6304, 6305, 6354, 6355, 6384, 6385 Series7TS system - 7004, 7005, 7304, 7305, 7354, 7355, 7384, 7385 Series and then threads into the nuts seated in the ELS - Equipment Locking System accessory receiver plate (6004-35). If you're trying to attach a QLS, MLS / MOLLE receiver to the leg shroud's 3-hole pattern, then see the 1/2" screw applications. Competition and Tactical Belts <-- to --> ELS Receiver These 3/8" screws goes through the inside of a Safariland ELS belt (assuming no extra spacers), such as: 4332 ELS Tactical Belt032 ELS Competition Belt and threads into the nuts seated in an ELS - Equipment Locking System receiver plate (6004-35). MOLLE Accessory Fork <-- to --> QLS or ELS Receiver This 3/8" screws and nuts will connect: MLS / MOLLE accessory locking fork (6004-16) to QLS 22 Receiver, like used with 6004-16-55-MS22 MLS / MOLLE accessory locking fork (6004-16) to ELS 35 receiver (see photo), like used with a MOLLE vest loop. Universal Flex Adapter (UFA) <-- to --> ELS Fork This can connect the top holes of a 6004-UFA universal flex adapter to an ELS - Equipment Locking System fork (6004-34), which would be useful for connecting a leg shroud to an ELS competition belt. Disclosures This item will be loose packed with no consumer packaging, instructions, or safety labels included. No warranty or endorsements are implied from the manufacturer or compatible brands. However, our seller return policy is the most generous option defined by eBay and is described below. Free Shipping and Returns on USA Orders Shipping is free to the USA, US territories, and APO/FPO via US Postal Service Ground Advantage® (2-5 days in transit; based on location). Orders paid before noon Eastern Time (Monday-Saturday) will typically ship out the same day, excluding Sunday or post office holidays. eBay shows estimated delivery dates on the listing and at checkout. Nothing ships on Sunday or during post office holidays. All such orders will ship the day the carrier re-opens. Expedited shipping may be available at checkout for an extra fee. For USA orders, we'll pay for return shipping if needed and we'll refund the full purchase amount as long as everything is returned in its original condition. International Shipments International shipments use the eBay International Shipping program which means duties, shipping, taxes, and support are provided directly by eBay. With this program, sellers ship to an eBay hub in the USA and then eBay handles the international aspects. No returns will be accepted for international orders, but refunds will be honored for any seller-related issues covered by eBay's policies. Need Help or Have a Question? If you have any questions or are looking to buy a larger quantity, only nuts, or only screws, then press "Contact Seller" to get in touch. We're glad to do research if you have a question not addressed in this listing.

Price: 10.29 USD

Location: Greenville, South Carolina

End Time: 2024-09-01T17:18:12.000Z

Shipping Cost: 0 USD