Description: SIZE : 6.75" Wide x 1.25" Tall; 3/8" ThickNew 345 HEMI emblem Chrome with black outline includes alignment sheet ( Auction is for 2 emblems ) ImportantVehicle Emblem and Badge Installation InstructionsStep 1Removing old emblem or emblems can done neatly by using a heat gun on the lowest setting. Carefully pry the old emblem off using a putty scraper.Step 2Then clean the area where the emblem adhesive still remains. Use adhesive cleaner and a clean rag.Step 3Most important step is to use rubbing alcohol on a different rag to clean the remaining grease or dirt from the location. Allow it to air dry.Step 4Using a level or ruler to create a straight line parallel to the ground, marking the location of the emblem against desired surface or body lines. Use painter’s tape to make your guide lines.Step 5Prepare the emblem, making sure it's clean. Be sure to never touch the application adhesive on the back of the emblem after Remove the backing tape from the adhesive.Step 6Hold the emblem just above the surface in the desired location, using the painter’s tape as a guide to keep the emblem level located properly.Step 7Stick the emblem on and hold it in place until the adhesive has had a chance to setup bond on the surface of the vehicle. This usually takes 10 seconds..
Price: 11.88 USD
Location: Brooklyn, New York
End Time: 2023-09-09T17:31:52.000Z
Shipping Cost: 3.8 USD
Product Images
Item Specifics
Returns Accepted: ReturnsNotAccepted
Country/Region of Manufacture: United States
Manufacturer Part Number: AMP-85100-184x2
Primary Color: Chrome with black outline
Placement on Vehicle: Front, Left, Lower, Rear, Right, Upper
Brand: TD SHOP
Manufacturer Warranty: Yes
