Description: ✿UNIVERSAL:Can be cut to fit any application.(you need additional parts to make it fit at some situation)✿HIGH QUALITY:Made of high quality stainless steel .Equipped with aluminum fittings and aluminum ferrules to eliminate fraying.✿The U-cut-to-fit outer housing is available in 24 or 36 inch lengths with a u-cut-to-fit stainless inner wire.✿Designed without cotter pins or set screws and adapt to factory and aftermarket pedals for an easy installation.✿PQY CUSTOMER SERVICE.If you have any problem ,please contact us and we will respond you on 24 hours except weekends and holidays. Product Description Installation Tips: 1. Before beginning the installation, disconnect the negative battery cable and use wheel chocks to block the vehicle's wheels. 2. The hole in the firewall must line up with the hole in the upper arm on the Throttle Pedal. Determine exactly where the Throttle Cable needs to pass through the firewall. 3. Remove the carb end assembly. Pull the inner wire out of the cable housing,insert the firewall fitting through the firewall from the engine side. 4. Insert the throttle cable adjuster into the Cable Mounting Bracket. NOTE:There must be some slack to allow for engine movement. 5. Reinstall the inner wire into the cable housing from inside the passenger compartment. Connect the clevis (or the ball end if the clevis was removed) to the Throttle Pedal. 6. Attach the carb end assembly to the throttle arm. Tighten the nut. 7. Cut the inner wire off so that roughly 1" of the inner wire will remain inside the carb end assembly. 8. Insert the inner wire into the carb end assembly. Pull all the slack out of the inner wire and tighten the set screw in the carb end assembly. 9. Check for proper operation of the throttle (and Kickdown if equipped) and adjust as necessary. Make sure there is no binding in the throttle linkage and that the throttle returns to the closed position when the pedal is released.
Price: 24.29 USD
Location: Tampa, Florida
End Time: 2024-09-30T03:59:44.000Z
Shipping Cost: 0 USD
Product Images
Item Specifics
Return shipping will be paid by: Seller
All returns accepted: Returns Accepted
Item must be returned within: 60 Days
Refund will be given as: Money Back
Return policy details:
Brand: PQY
MPN: Does not apply
Part Number: TCB03
Batteries Required?: No
Finish: Powder Coated
Item Package Quantity: 1
Material: Stainless Steel, Aluminum
Item Weight: 4.7 ounces
Operation Mode: Mechanical
Batteries Included?: No
Finish Type: Powder Coated
Package Dimensions: 5.98 x 5.98 x 1.1 inches
Manufacturer: PQY
Type: Does not apply
