1920-D BUFFALO 5C PCGS MS 66

Description: eBay StoreAbout UsAdd as FavoriteFeedbackContact1920-D BUFFALO 5C PCGS MS 66Grading Service: PCGSCert Number: 43895577SKU: 143994Coin Historyt was a difficult time for Charles Barber, chief engraver of the United States Mint. Although Theodore Roosevelt was no longer in office, his desire to have more classical designs on our coins, as expressed to Augustus Saint-Gaudens over dinner in 1905, was very much alive. Barber’s uninspired Liberty Head nickel had been in production since 1883. Under the Coinage Act of 1890, a change in the design was permitted after 25 years. Secretary of the Treasury Franklin MacVeagh, originally a Roosevelt appointee, wasn’t about to pass up the opportunity. Reminded by his son in May, 1911 that a new nickel would be “A permanent souvenir of the most attractive sort,” MacVeagh, pointedly bypassing the competent but mediocre Barber, started the process for a new design. The Buffalo nickel became a reality less than two years later. On March 4, 1913, coins from the first bag to go into circulation were presented to outgoing President Taft and 33 Indian chiefs at the groundbreaking ceremonies for the National Memorial to the North American Indian at Fort Wadsworth, New York. James Earle Fraser, a former assistant to Saint-Gaudens and a prolific artist best known for his monumental “End of the Trail” Indian sculpture, created a truly unique design for the new coin. Up until that time, except for Bela Lyon Pratt’s quarter and half eagle of 1908, the “Indians” portrayed on U.S. coins were primarily Caucasian with an Indian headdress, epitomized by Saint Gauden’s Greek Nike head on the 1907 Indian eagle. Fraser’s design accurately portrays a male Native American, and the obverse portrait was a composite of three chiefs who had posed for him years earlier. Keeping with the distinctly American theme, he depicted an American bison on the reverse. The inscriptions UNITED STATES OF AMERICA and E PLURIBUS UNUM are artfully placed over the buffalo, with the denomination FIVE CENTS below. The legend LIBERTY and the date are similarly well executed on the coin’s obverse. Fraser’s design was medallic and beautiful, and for that reason was favored by Secretary MacVeagh. Its allure seemed to completely elude Barber, who complained that the design elements were too large and didn’t allow for the proper placement of inscriptions. Barber didn’t get very far with this, as the design remained unchanged over his objections. Reservations also came from the vending machine industry, whose devices were designed primarily for accepting cents and nickels. Particularly persistent was the Hobbs Manufacturing Company, which marketed a machine for detecting counterfeit coins. Mr. Hobbs was certain that Fraser’s design would not work in his mechanism, and he asked that significant changes be made to the models. After much wrangling over this, Secretary MacVeagh instructed the Mint to proceed with the original design and let the vending machine companies adapt their mechanisms to the coin. Over 1.2 billion Buffalo Nickels were minted from 1913 through 1938 at three mints; Philadelphia (no mintmark), San Francisco (S), and Denver (D). The mintmark can be found on the reverse under the denomination, while the designer’s initial “F” is below the date. There were two varieties made. Type 1 nickels, minted only during the first few months of 1913, had the denomination FIVE CENTS on a raised mound. As early as April, rapid wear in this area became evident on the coins in circulation, so Barber finally got his chance to modify Fraser’s design. He cut away the mound, creating an exergue into which the denomination was set. This solved the reverse wear problem, but then he kept going. He smoothed out much of the detail and granularity in both the Indian’s portrait and the bison’s hide. The resulting Type 2, however, lacked much of the artistic impact of the original. Barber again made minor modifications in 1916, and some specialists consider this a third subtype, but most type collectors only consider the Type 1 and 2 coins as actual varieties. It is strange that during all his modifications, Barber never addressed the problem of the date wearing down too rapidly. No Buffalo nickels were made in 1922, 1932 and 1933. Some 5,967 matte proofs were made from 1913 through 1916, and 10,189 brilliant proofs in 1936 and 1937. Strike was an inherent problem with this coin from the beginning, and many deceptively well struck business strikes have been mistaken for the matte proofs and vice versa. Many mintmarked coins, especially from 1918 through 1934, are virtually unavailable well struck. When grading these coins of this type, you must take the surface into account, as many full luster pieces will not show rounded relief detail on the high points of the horn or the fringe on the tail. Generally, the date and LIBERTY wiStore CategoriesStores HomeColonialsHalf CentsLarge CentsSmall CentsTwo-Cent PiecesThree-Cent SilversNickelsHalf DimesDimesTwenty-Cent PiecesQuarter DollarsHalf DollarsSeated DollarsTrade DollarsMorgan DollarsPeace DollarsOne Dollar GoldTwo Fifty GoldThree Dollar GoldFive Dollar GoldTen Dollar GoldTwenty Dollar GoldCommemorative GoldThree-Cent NickelsOther

Price: 57800 USD

Location: Laguna Beach, California

End Time: 2024-11-25T05:21:00.000Z

Shipping Cost: 0 USD